Technical Tests; System Test; Ram Menu (Reset); Ram Clear - Standard Horizon CPN1010i Owner's Manual

TECHNICAL TESTS

SYSTEM TEST

If you have connected your CPN Series Chart Plotter according to the instructions, and chosen
the proper menu selection for your device, and are still having problems with your CPN Series
Chart Plotter, the extended auto-test should help determine the problem. To enter the System
Test it is needed to hold any key while the Chart Plotter application is starting:
1. Select the Start Up page.
2. Tap on the Plotter Icon
shown, press and hold the
of the key. A new menu will appear on the display:
Choose the test and tap on it. To exit from the System Test choose EXIT option.

RAM MENU (RESET)

After performing a RAM Clear all Marks, Routes and tracks will be erased.

RAM Clear

All the internal memory can be erased and the default setting restored. If the CPN Series
Chart Plotter exhibits unusual operations, or appears to be malfunctioning, it may be
possible to correct the problem by clearing RAM.
This operation will erase all Marks, Routes, stored Track plots and Destinations. It will also
return all selections (Input Data Format, Autopilot selection, etc.) to original default values.
To confirm clear RAM press the
clear RAM press the
Page 162
, when the STANDARD HORIZON sunrise page is
key until the System Test display is shown, then let go
ShuttlePoint Knob (but if at this time you do not wish to
key).
Owner's Manual