Creating Marks; Creating A New Mark Using The Chart Page; Editing A Mark Or Waypoint - Standard Horizon CPN1010i Owner's Manual

CREATING MARKS

A User Point is an object that you can place on the charts to mark a specific point. The CPN
Series Chart Plotter features two types of User Points: Marks and Waypoints.
· Mark can be a stand alone position or be linked to a Route. A Mark is place on the Chart
Page using the
and tapping on
· Waypoints are always liked to a Route. Are placed on the Chart Page using the
key.
The difference between a Mark and a Waypoint is:
a. when a Route is created using Waypoints and the Route is deleted the Waypoints are also
deleted.
b. if a Route is created using Marks and the Route is deleted the Marks remain.

CREATING A NEW MARK USING THE CHART PAGE

1. Move the ShuttlePoint Knob or tap the screen to the desired or approx. Lat/Lon and
press the
2. You will notice a Mark is placed under the location of the cursor and a popup window
is shown with the exact Lat/Lon of the Mark.
3. If the position is incorrect, tap on the
position, Mark name and icon type by tap on the position, Mark name or icon.
After entering in all the Marks it is a good practice to back up the points to a SD CARD.

EDITING A MARK OR WAYPOINT

1. Tap on the Mark or Waypoint you want to edit.
2. Tap on the
CPN700i and CPN1010i Multimedia Chart Plotters
key or by entering in information in the Marks/Waypoints List page
.
key.
Soft Key shows the Mark Edit popup window.
Soft Key which allows changing of the
Page 61