Closing Soft Keys; Memory Devices Safely Removal - Standard Horizon CPN1010i Owner's Manual

Closing Soft Keys

The Soft Keys are closed in the following ways while in Chart Plotter Mode:
· will automatically be removed if the display is not pressed from more than a specific
timeout user selectable (see the Home Mode Revert setting in the "Settings in General
Setup Menu" paragraph, "Chart Plotter" section).
· by tapping on the Close Soft Key control
· by pressing the

MEMORY DEVICES SAFELY REMOVAL

To replace an SD CARD with no chart data or a USB memory stick remove the device and
wait at least 7 seconds before inserting the new one.
To remove an SD CARD with chart data during the CPN Series Chart Plotter working follow
the procedure described in the Chart Plotter section.
Page 24
key.
.
Owner's Manual