Loading A File From The Sd Card; Deleting A File From The Sd Card; Refreshing The Sd Card - Standard Horizon CPN1010i Owner's Manual

6. A popup SAVE FILE window appears. In this window you can change the name and the
file type tapping on it.
7. To save the file, tap on
be shown SAVING then shows SAVING...OK.
8. Tap on to confirm.

LOADING A FILE FROM THE SD CARD

If you have a problem and accidentally loose the User Points in the CPN Series
with a SD
Plotter, CARD
Plotter using the following procedure:
1. Press the
2. Tap on the right arrow next to DSC DIR Desktop icon two times to display USER CARD.
3. Tap on USER CARD. The USER SD CARD page appears.
4. Select the saved file from the USER SD CARD list by tapping on it.
5. Tap on the
loading is complete.
6. Tap on to confirm.

DELETING A FILE FROM THE SD CARD

You may want to delete a saved file on the SD
1. Press the
2. Tap on the right arrow next to DSC DIR Desktop icon two times to display USER CARD.
3. Tap on USER CARD. The USER SD CARD page appears.
4. Select the saved file from the USER SD CARD list by tapping on it.
5. Tap on the
the file.
6. Tap on to confirm.

REFRESHING THE SD CARD

You may want to change the SD
1. Press the
2. Tap on the right arrow next to DSC DIR Desktop icon two times to display USER CARD.
3. Tap on USER CARD. The USER SD CARD page appears.
4. Open the door, remove the SD CARD from the slot and insert another SD CARD into
the same slot.
5. Tap on the
information.
Page 82
it is possible to load the data back into the CPN Series
key, tap on User Points.
Soft Key. The Information window LOADING...OK appears when
key, tap on User Points.
Soft Key. The Warning window appears to confirm you want to delete
CARD
key, tap on User Points.
Soft Key. This "new" SD CARD is now ready to receive and store
in window. The Information window is momentarily
inserted in the slot.
CARD
inserted in the slot with a new one.
Chart
Chart
Owner's Manual