Initial Setup; Cursor And Menu Selection Speed; Changing The Ship Icon - Standard Horizon CPN1010i Owner's Manual

3. Tap on the small GENERAL icon (see B) on the Desktop to show the General Setup
page (see C).

INITIAL SETUP

Cursor and Menu selection speed

The CPN Series Chart Plotter allows you to control the speed the Cursor moves on the chart
and in menus using the
speed follow the procedure below:
1. Press the
2. Tap on GENERAL (see B). The General Setup menu appears (see C).
3. Tap on CURSOR SPEED. The menu now shows two selections, Chart and Menu which
allow the Cursor Speed to be selected as High, Medium or Low on the Chart Page or
within the menus.
4. Tap on CHART or MENU.
5. Tap on Low, Medium or High to set the desired speed.
6. Press the
7. Move the cursor on the Chart Page and see if the speed is to your liking.

Changing the Ship Icon

The Ship Icon may be changed to one of the following icons for Sail or Power:
CPN700i and CPN1010i Multimedia Chart Plotters
ShuttlePoint Knob. The default setting is Medium, to change the
key, tap on Setup Menu (see A).
key repeatedly until the menu disappears.
Page 29