Chart - Standard Horizon CP150 Owner's Manual

3.2.1 Chart

'MENU' + "CHART" + 'ENTER'
Shows the chart display and Data Window (Text Area if selected). With the following
procedure:
'MENU' + "GENERAL SETUP" + 'ENTER' + "DATA WINDOW" + 'ENTER'
it is possible to customize the Data Window layout among (see following Sections):
It is also possible to edit fields shown in every screen configuration. Edit mode is
activated directly from the chart display pressing 'MENU' for 3 seconds.
Once the Edit mode is active, the first box with the label turns gray and its frame is
drawn bold. The user can choose the active box by moving the ShuttlePoint knob left
or right. Pressing 'ENTER' the user can choose the data to be shown on the selected
field by moving through the selections and pressing 'ENTER' again.
If the selected data type can be shown with different units of measure the list of the
units is shown next to it. Once 'ENTER' is pressed the data type and its unit are set.
The selection window is closed and the Data Window changes according to the
selected data type.
Press 'CLEAR' to exit the Edit mode.
GPS Chart 150
Figure 3.2.1 - Data window layout
Figure 3.2.1a - Edit mode
Page 15