Transparency; 3D Exaggeration Factor; General Chart Display Functions; Icon Size - Standard Horizon CPN1010i Owner's Manual

5. Tap on to exit to the Chart Page.

Transparency

This function sets the transparency value between the vector chart and the layer over it
(raster or satellite). To activate this function follow the procedure:
1. Press the
2. Tap on DISPLAY. The Chart Display menu appears.
3. Tap on TRANSPARENCY.
4. A new window appears to insert the desired value (0 - 100). Tap on
the desired value, then tap on
the Rotary Knob to cycle between bar,
Available only if Overlay is Satellite or Raster Chart.

3D Exaggeration Factor

This function vertically stretches the land elevations and depths. It sets the 3D Exaggeration
Factor among 5 levels. To activate this function follow the procedure:
1. Press the
2. Tap on DISPLAY. The Chart Display menu appears.
3. Tap on 3D EXAGGERATION FACTOR.
4. The menu shows Level1, Level2, Level3, Level4 and Level5. Tap on the item you want.
5. Tap on to exit to the Chart Page.
Available only in 3D mode.

GENERAL CHART DISPLAY FUNCTIONS

Icon Size

It is possible to set the size of all icons drawn on the charts, selecting between Standard
(default) and Large size. To activate this function follow the procedure:
1. Press the
2. Tap on DISPLAY. The Chart Display menu appears.
3. Tapping on ICONS SIZE selects between Standard or Large.
4. When the item you want has been selected, tap on
Page 54
key, tap on Setup Menu.
key, tap on Setup Menu.
key, tap on Setup Menu.
(tap on
or
to exit from menu.
or to reach
otherwise). You can use
.
Owner's Manual