Creating A Route Using Waypoints; Changing The Name Of A Route - Standard Horizon CPN1010i Owner's Manual

CREATING A ROUTE USING WAYPOINTS

1. On the Chart Page move the
of the starting Waypoint in the Route.
2. Press the
cursor.
3. Move the ShuttlePoint Knob or touch the screen to the second Lat/Lon of the next
leg in the Route.
4. Press the
a line joins the Starting Waypoint to the Second Waypoint.
5. Repeat steps 3 and 4 until all Waypoints are entered into the Route.
At this point the Route is saved as ROUTE01. If you would like to save the Route under a specific name
follow the next steps.

CHANGING THE NAME OF A ROUTE

1. To name the Route move the
Waypoint or on leg). For example if you touch on Waypoint this screen appears:
2. Tap on the
Page 66
ShuttlePoint Knob or touch the screen to the Lat/Lon
key, you will notice the Starting Waypoint
key. You will notice another Waypoint is shown under the cursor and
ShuttlePoint Knob or touch the screen on the Route (on
Soft Key. The Edit Route page appears:
will be placed under the
Owner's Manual