Single; Dual; Data Window Selections - Standard Horizon CPN1010i Owner's Manual

For & HIGHWAY please see "Chart/Highway" in the "Navigation Pages" section, and for FIND see "Using
Find Services" section.

Single

To show a single chart, follow the procedure below:
1. Press the
2. Tap on SINGLE.

Dual

Selecting this page will show two chart windows, both of which the chart may be
independently setup:
1. Press the
2. Tap on DUAL.
When Dual Chart is selected, you will notice one of the chart windows will have a red boarder
around it. This red boarder indicates which chart window the CPN Series Chart Plotter has
the focus on, meaning if the
move. The focus may be changed to the other chart window by tapping on the desired
screen: the red boarder around the window is moved from active window to the other.

Data Window Selections

The CPN Series Chart Plotter windows may be changed on CHART and DUAL CHART
pages by the following procedure.
CPN700i and CPN1010i Multimedia Chart Plotters
key, tap on Chart.
key, tap on Chart.
ShuttlePoint Knob is moved the cursor on chart window will
Page 85