Dsc Directory; Video Input; Video Input Menu - Standard Horizon CPN1010i Owner's Manual

DSC Directory

CPN Series Chart Plotters are able to display the DSC Directory. From this page the user
can assign the Vessel Name, Contact Name and Phone number to any MMSI (Maritime
Mobile Service Identity) so that, when a DSC Distress Call or Position Request is received,
the name of the vessel is displayed in place of the MMSI number - a unique number that is
assigned to a DSC radio station for use in emergency situations.
To display the DSC Directory:
1. Press the
2. Tap on DSC DIR.
This page allows to:
· tap on
window appears to change NAME, MMSI, CONTACT and PHONE. Change the
desired item using the touchscreen keyboard; tap on
entry tap on
· tap on
NAME, MMSI, CONTACT and PHONE. For each item enter the name/number using
the touchscreen keyboard; tap on
and then tap on
· tap on
· tap on

VIDEO INPUT

The CPN Series Chart Plotters are able to be connected to a NTSC or PAL type video camera
or DVD player. To connect, a optional Adapter Cable ACVC10 is needed. When connected,
the Video image can be set to full screen or Picture in Picture (PiP) view which may be placed
over the Chart, Navigation, Highway, Tide and NMEA pages image at full screen.
If a Video signal is not detected the VIDEO menu will be greyed out.

Video Input menu

There are two ways to select the Video Input menu:
Video Input Menu from Video Desktop Icon
1. Press the
2. Turn the Rotary Knob or tap on the right bottom arrow to scroll the Desktop Icons to
display VIDEO and tap on it. The Video Input menu appears.
Page 100
key, tap on User Points.
: allows to change the selected DSC Directory Entry. A popup
and then tap on
: adds a new DSC Directory Entry. A popup window appears to insert
.
: deletes the selected DSC Directory Entry
: deletes all DSC Directory Entries
key, tap on Setup Menu.
.
when finished. To save entry tap on
when finished. To save
Owner's Manual