Standard Horizon CPN1010i Owner's Manual
Multimedia gps chart plotters
Hide thumbs
Also See for CPN1010i:
- Owner's manual (188 pages) ,
- Operation manual (32 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Standard Horizon CPN1010i
Summary of Contents for Standard Horizon CPN1010i
- Page 2 CPN700i/CPN1010i Multimedia Chart Plotters Owner's Manual CPN700i and CPN1010i Multimedia Chart Plotters Page 3...
- Page 3 · The CPN Series Chart Plotter contains dangerous high-voltage circuits which only experienced technicians can handle. · STANDARD HORIZON will not be liable for errors contained herein, or for incidental or consequential damages in connection with the performance or use of this material.
-
Page 4: Table Of Contents
Assigning Page Soft Keys ................. 32 Time Setup ....................32 Selecting Coordinate System ..............34 Loran TD ....................34 Changing the Display Color ............... 34 Selecting Language ................... 35 Chart Control Icon ..................36 CPN700i and CPN1010i Multimedia Chart Plotters Page 5... - Page 5 SETTINGS IN GENERAL SETUP MENU .............. 37 CARTOGRAPHY OVERVIEW ..................38 BUILT-IN CHARTS --- AVAILABLE ONLY FOR AMERICA USERS ....38 Updating Built-In Charts ................39 C-MAP 4D DIGITAL NAVIGATION CHARTS THAT GROW WITH YOUR BOATING NEEDS ..41 C-MAP 4D: MAX Content ................42 C-MAP 4D: FULL 4D Content ..............
- Page 6 Additional Functions on Chart Page: Information on Objects ....88 Display Mode ..................... 89 Marine Settings ..................90 Depth Settings ................... 90 Chart Settings .................... 91 Underwater Objects Settings ..............92 NAVIGATION PAGES .................... 92 Highway Page .................... 92 CPN700i and CPN1010i Multimedia Chart Plotters Page 7...
- Page 7 Chart/Highway Page .................. 93 Compass Page ..................93 GPS Status Page ..................94 Setup Menu ....................94 WAAS/EGNOS Setting ................95 NMEA DATA PAGES ..................... 95 NMEA Display Page .................. 95 Customizing data box in the NMEA Display Page ........96 NMEA Data Page ..................
- Page 8 CPN Series Chart Plotter to NMEA 0183 connection examples .... 149 VIDEO INPUT CONNECTOR ................151 VIDEO INPUT CONNECTIONS for CPN700i ............151 VIDEO INPUT/OUTPUT CONNECTIONS for CPN1010i ........152 PRE-AMP OUTPUT - EXTERNAL AMPLIFIER/SPEAKER CONNECTIONS ..152 CPN Pre-Amp connector pin out ............. 153 OPTIONAL USB THUMB DRIVE .................
- Page 9 CARTRIDGES (used by Standard Horizon Technicians) ........163 Internal Data Base Test ................163 SD CARD Test ..................163 SERIAL PORTS (used by Standard Horizon Technicians) ......... 163 Change Parameters ................. 163 Input Data Display ................... 163 Loop-Back Test ..................163 SYSTEM UPDATE ........................
-
Page 10: Introduction
INTRODUCTION Congratulations on your purchase of the STANDARD HORIZON CPN Series Chart Plotter. Whether this is your first STANDARD HORIZON product or not, we are committed to ensuring your enjoyment and satisfaction with this unit. Our Technical support personnel stand behind every product we sell. Post-Sales Support can be obtained from your local dealer or distributor. -
Page 11: Packing List
Accessories and replacements parts may be ordered in the USA by contacting STANDARD HORIZON’s Parts department on 714-827-7600 Extn. 6800 or by email at marineparts@yaesu.com. UK customers may contact STANDARD HORIZON on 01962 866667 or by email to service@yaesu.co.uk. PART CODE... -
Page 12: Optional Accessories
OPTIONAL ACCESSORIES CPN700i and CPN1010i Multimedia Chart Plotters Page 13... -
Page 13: General Operation
This Owner’s Manual includes information for both the 7inch CPN700i and 10inch CPN1010i Multimedia Chart Plotters which are referenced to CPN Series Chart Plotters throughout this manual. In addition when a word(s) is bold and underlined it is referring to a menu selection on the display. -
Page 14: Brightness Control
ShuttlePoint Knob moves the cursor on the Chart Page and to select items in menus ZOOM Keys change the scale of the chart to show a smaller or a wider area. When pressed allows the Rotary knob to be used to change zoom levels CPN700i and CPN1010i Multimedia Chart Plotters Page 15... -
Page 15: Touchscreen
User Points and update software TOUCHSCREEN The CPN700i and CPN1010i use a touchscreen display. Many functions are controlled by touching the display or using the dedicated keys, ShuttlePoint or Rotary Knobs. -
Page 16: Touchscreen Keys
Configuration Manager. The keyboard can be operated by the touchscreen or by moving ShuttlePoint Knob. A character is entered (turns red) when the key is tapped once or when ShuttlePoint Knob is pressed. Touchscreen Keyboard for Chart Plotter Mode CPN700i and CPN1010i Multimedia Chart Plotters Page 17... -
Page 17: Touchscreen Keyboard For Other Applications
Touchscreen Keyboard for other applications MENU DESCRIPTION The menu window has the following elements. Refer to the previous picture: · : a single touch on the arrow icon closes the current menu and displays the previous menu level. In the first menu level it closes the menu and goes back to the Main Menu page (in the example below closes the General Setup menu and goes back to the Main Menu page. -
Page 18: Warning Window
ShuttlePoint Knob (if enabled, see SHUTTLEPOINT ENTER item in “Settings in General Setup Menu” paragraph, “Chart Plotter” section) · move the Rotary Knob left/right to place cursor on the item and then press the Rotary Knob Refer to the following example: CPN700i and CPN1010i Multimedia Chart Plotters Page 19... -
Page 19: Chart Plotter Controls
CHART PLOTTER CONTROLS KEYS The CPN700i and CPN1010i in addition to being able to control functions with the touch display, for your convenience dedicated keys and knobs are also provided. You will notice when a key is pressed a single beep will be produced which means the key press is valid. - Page 20 · Used together with the key allows zooming. ACTIVE ONLY IN HART LOTTER MODE · To rotate the chart: press this key, then rotate the Rotary Knob. The rotate angle ranges from 0 to 359 degrees. CPN700i and CPN1010i Multimedia Chart Plotters Page 21...
-
Page 21: Playing Music In Background (For Chart Plotter Mode Only)
ACTIVE ONLY IN HART LOTTER MODE · To tilt the chart: press this key, then rotate the Rotary Knob. The tilt angle ranges from 90 to 11 degrees (90 is the view from the top). Clockwise rotation increases the tilt angle, counterclockwise rotation decreases the tilt angle. ACTIVE ONLY IN HART LOTTER MODE ON... -
Page 22: Stopping To Play
Touch and hold the Page Change Key (refer to the image below) to show Soft Keys to access other pages. · Other Pages (Tide, Highway, Compass, GPS and Fish Finder Pages) Tap anywhere on the page to show the Soft Keys: CPN700i and CPN1010i Multimedia Chart Plotters Page 23... -
Page 23: Closing Soft Keys
Closing Soft Keys The Soft Keys are closed in the following ways while in Chart Plotter Mode: · will automatically be removed if the display is not pressed from more than a specific timeout user selectable (see the Home Mode Revert setting in the “Settings in General Setup Menu”... -
Page 24: Chart Plotter
30 seconds. 4. The Splash Screen page (see A) is shown again before the Warning page appears (see C). Move the ShuttlePoint Knob down or touch underneath the scroll bar to read the CPN700i and CPN1010i Multimedia Chart Plotters Page 25... -
Page 25: Switching Between Modes
Warning page. Tap on to accept the terms. Other Warning pages might appear, tap to confirm. Only for America users: If Built-In Charts are out of date other warning pages are displayed. 5. When a CPN Series Chart Plotter is first turned on it will take some time for the GPS to acquire a fix of your position. -
Page 26: Switching Between 2D And 3D Modes
The screen shows the Chart Page in 3D (see D). Using the 1. The Chart Page in 2D mode is shown (see A). Press the key: the following menu appears (see B). CPN700i and CPN1010i Multimedia Chart Plotters Page 27... -
Page 27: Menu System
2. To select the 3D mode tap on a desired 2D or 3D icon among the available ones. 3. As soon as the desired 3D icon has been tapped (see C), the screen shows the selected Chart Page in 3D (see D). MENU SYSTEM The CPN Series Chart Plotters have a unique menu system which allows you to select a page and see subpages on a desktop to make choices quick and easy. -
Page 28: Initial Setup
7. Move the cursor on the Chart Page and see if the speed is to your liking. Changing the Ship Icon The Ship Icon may be changed to one of the following icons for Sail or Power: CPN700i and CPN1010i Multimedia Chart Plotters Page 29... -
Page 29: Selecting Course Up/North Up
This setting also controls what type of a ship bow is displayed on the Highway page. The default setting is Power boat. To select the Ship Icon you want follow the procedure: 1. Press the key, tap on Setup Menu (see A). 2. - Page 30 · Single tap: changes to the next page. In the example below a single tap on the Page Change Icon changes to the Compass page. CPN700i and CPN1010i Multimedia Chart Plotters Page 31...
-
Page 31: Assigning Page Soft Keys
· Long press: shows the page Soft Keys. To change the page, tap on the desired Soft Key, refer to the image below: tap on the Soft Key to change to the Compass page. The pages defined on the Soft Keys are used to define the page change cycle. Assigning Page Soft Keys The default pages are: The page Soft Keys can be individually customized from the default pages:... - Page 32 8. Tap on to exit the menu and show the last selected page. By setting the time in the steps above, the time shown on the Tide Page is automatically set up. CPN700i and CPN1010i Multimedia Chart Plotters Page 33...
-
Page 33: Selecting Coordinate System
Selecting Coordinate System GPS Coordinates may be changed to show Latitude/Longitude (default ddd.mm.mmm), Loran TDs or UTM. To change the Coordinate System, follow the procedure below: 1. Press the key, tap on Setup Menu. 2. Tap on ADVANCED. The Advanced Setup menu appears. 3. -
Page 34: Selecting Language
Chinese or English. The translations are included in menus, data pages, warning/alarm messages, full/quick info, list of objects found by find/nearest function, and on charts (such as place’s names and buoy’s names and so on). To select the language you want: CPN700i and CPN1010i Multimedia Chart Plotters Page 35... -
Page 35: Chart Control Icon
1. Press the key, tap on Setup Menu. 2. Tap on GENERAL. The General Setup menu appears. 3. Move the ShuttlePoint Knob down or turn the Rotary Knob or touch underneath the scroll bar until LANGUAGE is selected. 4. Tap on LANGUAGE. Another popup window will be shown with the available languages. -
Page 36: Settings In General Setup Menu
Series Chart Plotter is exposed to sunlight. Classic uses vivid chart colors presentation. NOAA allows setting NOAA paper chart colors presentation. CURSOR SPEED Selects the speed among Low, Medium (default) and High for the cursor in the CHART page and within the MENU. CPN700i and CPN1010i Multimedia Chart Plotters Page 37... -
Page 37: Cartography Overview
MEASURE DISTANCE When this function is On, tap (or move the ShuttlePoint Knob) on a location where you want to start measuring a distance (see A). Tap on a second location where you want to finish measuring a distance. A line appears between the Start and Finish points and a popup window will be shown indicating the distance and bearing from the Start and Finish points (see B). -
Page 38: Updating Built-In Charts
2. Tap on the right arrow next to ADVANCED Desktop icon two times to display ABOUT and tap on it. 3. The About Page appears on the screen, refer to the picture below: CPN700i and CPN1010i Multimedia Chart Plotters Page 39... - Page 39 The Chart Update Card will be use ONLY on the CPN Series Chart Plotter with that UNIT ID code. After purchasing the Chart Update Card, follow the procedure to update the charts. 1. Press the PWR key to turn the CPN Series Chart Plotter Off. 2.
-
Page 40: C-Map 4D
· True-Type Font: improves text on chart for optimal reading. Presentation Features · Clear View: advanced legibility techniques providing more chart data on the screen · Clear Info: sophisticated "Human Dictionary" to translate Nav-Aid abbreviations found on paper charts. CPN700i and CPN1010i Multimedia Chart Plotters Page 41... -
Page 41: C-Map 4D: Max Content
· Enhanced Mixing Levels: seamless data presentation. C-MAP 4D: MAX Content · Nav-Aids: detailed information on Navigational Aids, including name, color, informa- tion on frequency, range of the light, etc. · Guardian Alarm: the Guardian Alarm is a user defined area in front of your vessel to alert you while navigating of possible obstacles on the chart. -
Page 42: C-Map 4D: Value Added Data
Soft Key. 5. Tap on in the popup window, then on on the next window. 6. Open the door, gently remove the SD CARD from the slot. 7. Press the key to exit. CPN700i and CPN1010i Multimedia Chart Plotters Page 43... -
Page 43: Using Find Services
USING FIND SERVICES This function finds only the cartographic objects which are been set to visible (On) in the menu. It is possible to search the Built-In Charts and the optional C-MAP 4D SD CARD for Port Services, Ports, Tide Stations, Wrecks, Obstructions, Points Of Interest, Lakes, User Points, GPS Coordinates or Information on any point on the Chart. -
Page 44: Port
Port (see B), otherwise tap on to search the Port by inserting the name. Tap on to exit from Port function. 6. Press the key at any time to return your cursor to your vessel’s position. CPN700i and CPN1010i Multimedia Chart Plotters Page 45... -
Page 45: Tide Stations
TIDE STATIONS A Tide Station is represented with a on the Chart Page. This feature is used to locate the 20 nearest Tide Stations to the position of your vessel. Once a Tide Station is selected the Tide Graph can be used to determine Tide height and draught of the Tide based on a user-specified time. -
Page 46: Wrecks
This feature is used to locate the 20 nearest Obstructions to the position of your vessel. An Obstruction is represented with an icon on the chart, see the following table: 1. Press the key, tap on Chart. CPN700i and CPN1010i Multimedia Chart Plotters Page 47... -
Page 47: Lakes Informations
2. Tap on FIND. The Find Services & More menu appears. 3. Tap on OBSTRUCTIONS. A window is shown with a list of nearest Obstructions (see A). 4. Move the ShuttlePoint Knob to highlight the desired Obstruction or tap on it. 5. -
Page 48: Quick And Full Info On Lakes
3. Tap on LAKES BY NAME. A window will be shown with a list of nearest Lakes (see A). Now you can browse the list (step a) or enter the Lake name (step b): a. Browse the list and tap on the desired Lake. CPN700i and CPN1010i Multimedia Chart Plotters Page 49... -
Page 49: Points Of Interest
b. Tap on to enter the desired Lake name. The touchscreen keyboard appears, it will allow you to enter in the name of the Lake you wish. Insert the desired name; when finished tap on , the keyboard disappears. Another window will appear displaying the distance and position of the Lake. -
Page 50: Coordinates
While tapping on the left side page moving through the Info Tree, all the relevant information of the selected object is shown on the right part of the page. 5. Press the key 3 times to exit to the Chart Page. CPN700i and CPN1010i Multimedia Chart Plotters Page 51... -
Page 51: Chart Display Functions
CHART DISPLAY FUNCTIONS The Chart functions menu can be access using the Main Menu as shown below: 1. Press the key, tap on Setup Menu (see A). 2. Tap on DISPLAY (see B). The Chart Display setup appears (see C) divided in two sections, one related to the 4D functions and another for generic chart display. -
Page 52: Overlay
2. Tap on DISPLAY. The Chart Display menu appears. 3. Tap on OVERLAY MODE. 4. The menu shows On Land (default), On Sea and On All. Tap on the item you want. CPN700i and CPN1010i Multimedia Chart Plotters Page 53... -
Page 53: Transparency
5. Tap on to exit to the Chart Page. Transparency This function sets the transparency value between the vector chart and the layer over it (raster or satellite). To activate this function follow the procedure: 1. Press the key, tap on Setup Menu. 2. -
Page 54: Place Name Size
When the Safety Status Bar is enabled, a status bar with six boxes shows the status of certain functions. Any warning or alarm condition is identified by the red color to indicate possible risk. CPN700i and CPN1010i Multimedia Chart Plotters Page 55... -
Page 55: Currents Prediction
To activate this function follow the procedure: 1. Press the key, tap on Setup Menu. 2. Tap on DISPLAY. The Chart Display menu appears. 3. Tap on SAFETY STATUS BAR. 4. The menu now shows the following selections: On: The Safety Status Bar is shown Off: The Safety Status Bar is not shown Icon: In this mode the Safety Status Bar is not shown, rather a Warning Icon will be shown in the top right corner on the chart page when an alarm condition is... -
Page 56: Chart Language
The default selection is North Up: the chart is shown with North toward the top of the display. Also it is possible to select Course Up: the top of the Chart Page orientated so it always shows the area ahead of the direction your vessel is travelling. CPN700i and CPN1010i Multimedia Chart Plotters Page 57... -
Page 57: Nav-Aids Presentation
1. Press the key, tap on Setup Menu. 2. Tap on DISPLAY. The Chart Display menu appears. 3. Turn the Rotary Knob to select COURSE UP/NORTH UP. 4. Tapping on COURSE UP/NORTH UP selects between North Up and Course Up. 5. -
Page 58: Compass Indicator
Rotary Knob to select SHIP ICON POSITION. 4. Tapping on SHIP ICON POSITION selects between Center or Bottom. 5. When the item you want has been selected, tap on to exit to the Chart Page. CPN700i and CPN1010i Multimedia Chart Plotters Page 59... -
Page 59: Pictures & Diagrams
PICTURES & DIAGRAMS Using optional C-MAP data SD CARDs allows you to show pictures or diagrams EPPESEN on the CPN Series Chart Plotter display. These Pictures are typically used to facilitate the identification of cartographic objects or places around the map: they can be the landscape layout nearby a harbor, the shape of a bridge or of a buoy etc. -
Page 60: Creating Marks
After entering in all the Marks it is a good practice to back up the points to a SD CARD. EDITING A MARK OR WAYPOINT 1. Tap on the Mark or Waypoint you want to edit. 2. Tap on the Soft Key shows the Mark Edit popup window. CPN700i and CPN1010i Multimedia Chart Plotters Page 61... -
Page 61: Deleting A Mark Or Waypoint
3. The Mark Icon appears selected, tap on it. The Mark Icons popup window appears. 4. Tap on the desired Mark Icon to select it. The Mark Icons window disappears. 5. Tap on the Mark Name. The touchscreen keyboard appears. Insert the desired name; when finished tap on , the keyboard disappears. -
Page 62: Marks/Waypoints (User Points) List
ICON: only icon (no name) is shown HIDE: Mark or Waypoint is hidden SHOW ALL: all Marks or Waypoints are shown ICON ALL: all Icons are shown without name HIDE ALL: all Marks or Waypoints are hidden CPN700i and CPN1010i Multimedia Chart Plotters Page 63... -
Page 63: Creating/Modify A New Mark In The User Points List
Allows deleting the selected point. Tap on to confirm. Allows deleting all stored points. Tap on to confirm. Sends the stored points to a external device (PC) capable of listening to NMEA WPL and RTE sentences. A information window appears after sending completed. Tap on to confirm. -
Page 64: Routes
Waypoints and the Route is deleted the Waypoints are also deleted. However if a Route is made of Marks and the Route is deleted the Marks stay in memory. See the example below that shows how the CPN Series Chart Plotter switches from one Waypoint to another. CPN700i and CPN1010i Multimedia Chart Plotters Page 65... -
Page 65: Creating A Route Using Waypoints
CREATING A ROUTE USING WAYPOINTS 1. On the Chart Page move the ShuttlePoint Knob or touch the screen to the Lat/Lon of the starting Waypoint in the Route. 2. Press the key, you will notice the Starting Waypoint will be placed under the cursor. -
Page 66: Creating An Olympic Route Or Boundary
ShuttlePoint Knob or touch the screen over the top of one of the Waypoints in a Route and tap on the Soft Key. The Edit Route page will be shown. 2. Tap on 3. Tap on an open Route number (example, Route 2). CPN700i and CPN1010i Multimedia Chart Plotters Page 67... -
Page 67: Creating A Route Using Marks On The Chart Page
4. Press the key. 5. To create the new Route, follow now the steps in the previous section “Creating a Route using Waypoints”. CREATING A ROUTE USING MARKS ON THE CHART PAGE To create a Route containing Marks you first must create the Marks and show them on the Chart Page. -
Page 68: Deleting A Route
This is done by the CPN Series Chart Plotter by reviewing the Route and looking for the following hazards that may effect safe navigation. · Land Areas · Shallow Water CPN700i and CPN1010i Multimedia Chart Plotters Page 69... - Page 69 · Intertidal Areas (areas emerged at low tide) · Rocks · Wrecks · Obstructions · Shoreline Constructions · Fishing Facility · Dredged Areas · Diffusers (submarine pipeline) · Mooring/Warping Facility · Production Installation (an installation for the exploitation of natural resources) ·...
-
Page 70: Easy Routing (Er)
Always remember that you should navigate with the most detailed and up-to-date chart data available from Jeppesen, and that CPN700i and CPN1010i Multimedia Chart Plotters Page 71... - Page 71 new information from National Hydrographic Offices may render your charts obsolete at any time. Easy Routing will now calculate and save the best suggested Route between your Start and End points (over a maximum total distance of 100Nm), based on parameters set by you. Easy Routing is only an aid to navigation and must be used in conjunction with conventional navigation practices.
-
Page 72: Warning Messages
(see H). Warning Messages The following are the messages of warning which could appear during Easy Routing operations. · Distance between Start and Destination points exceeded allowed limit of 100Nm. CPN700i and CPN1010i Multimedia Chart Plotters Page 73... -
Page 73: Goto Key Operation
Calculation cannot be started. Displayed when the Start or End points are too distant. · Start and Destination points placed at the same position. Route has not been calculated. Displayed when the Start or End points have been set at the same position. ·... -
Page 74: Goto A Route
1. Tap on an open position (no buoy, warning etc. under the cursor) on the Chart Page. 2. Press the key to show the GOTO popup window (see A). 3. Tap on ROUTE. CPN700i and CPN1010i Multimedia Chart Plotters Page 75... -
Page 75: Using The Shuttlepoint Knob
4. The SELECT ROUTE window will be shown (see B). 5. Select the desired Route by moving the ShuttlePoint Knob up/down or turning the Rotary Knob to left/right or touching the scroll bar up/down and tap on it. If an empty row has been selected, a Warning window appears, tap on 6. -
Page 76: Man Over Board (Mob) Function
MOB. A Warning window appears to advise that MOB is already present, tap on . This allows to stop navigating to the MOB point and also deleting it. CPN700i and CPN1010i Multimedia Chart Plotters Page 77... -
Page 77: Tracks
TRACKS The CPN Series Chart Plotter has the capability to store 20 individual tracks and record up to 10,000 Track Points. Please note the Track point memory is 10,000 points. This means for a long journey you may have to adjust the time or distance to be able to track your journey. -
Page 78: Saving And Starting A New Track
On the Chart, Navigation, Highway and NMEA Data pages the windows may be customized to show Trip Log information. 1. Select one of the pages listed above, press and hold the key. You will notice one CPN700i and CPN1010i Multimedia Chart Plotters Page 79... -
Page 79: Setup / Reset
PC. The SD CARD is useful to backup User Points when the RAM has to be cleared to resolve an issue or load new software, or if you would like to transfer Waypoint, Track and Route information from one STANDARD HORIZON CPN Series Chart Plotter to Page 80... -
Page 80: Formatting The Sd Card
3. Tap on the right arrow next to DSC DIR Desktop icon two times to display USER CARD. 4. Tap on USER CARD. The USER SD CARD page appears. 5. Tap on the Soft Key. CPN700i and CPN1010i Multimedia Chart Plotters Page 81... -
Page 81: Loading A File From The Sd Card
6. A popup SAVE FILE window appears. In this window you can change the name and the file type tapping on it. 7. To save the file, tap on in window. The Information window is momentarily be shown SAVING then shows SAVING...OK. 8. -
Page 82: Main Menu
ShuttlePoint Knob up/down or left/right. 3. Tap on the desired Desktop Icon to change the display. Rotary Knob Desktop Icons may be chosen and selected by rotating the Rotary Knob and pressing it in. CPN700i and CPN1010i Multimedia Chart Plotters Page 83... -
Page 83: Customizing A Page Icon
For example, to select the Dual Chart page: 1. Press the key. 2. Tap on Chart Page Icon. In the bottom of the page the available Desktop Icons appear (see A). 3. Tap on DUAL Desktop Icon (see B). The Dual Chart page appears (see C). CUSTOMIZING A PAGE ICON 1. -
Page 84: Single
Data Window Selections The CPN Series Chart Plotter windows may be changed on CHART and DUAL CHART pages by the following procedure. CPN700i and CPN1010i Multimedia Chart Plotters Page 85... -
Page 85: Customizing Data Windows
1. To change, press the key, tap on Setup Menu. 2. Tap on GENERAL. 3. Tap on CHART PAGE WINDOW. 4. Tap on the desired selection. The default is the 2 Lines Small window. 5. Tap on to exit to the Chart Page. Customizing Data Windows The data fields contained on the General, 1 Line Small/Large and 2 Lines Small data windows can be changed to the following selections:... -
Page 86: Collapsing Data Windows
A data window may be collapsed or shown to show more or less chart area. To collapse or expand a window, tap on the arrow key as show on the image below. CPN700i and CPN1010i Multimedia Chart Plotters Page 87... -
Page 87: Additional Functions On Chart Page: Information On Objects
· If the Data Window is enlarged, touching the icon collapses the 1 Line Large / 1 Line Small / 2 Lines Small Data Window and touching the icon collapses the General Data Window. · If the Data Window is collapsed, touching expands the Data Window back to 1 Line Large / 1 Line Small / 2 Lines Small or touching expands the General. -
Page 88: Display Mode
Boundaries Mode Auto Auto Auto Auto Auto Auto Chart Boundaries VAD Boundaries Chart Lock Underwater Ob. Limit 1000FT 32FT 32FT 32FT 32FT 1000FT Rocks Icon + Depth Icon Icon Icon Icon Icon CPN700i and CPN1010i Multimedia Chart Plotters Page 89... -
Page 89: Marine Settings
Obstructions Icon + Depth Icon Icon Icon Icon Icon Diffusers Icon + Depth Icon Icon Icon Icon Icon Wrecks Icon + Depth Icon Icon Icon Icon Icon Marine Settings To control the display on the chart of the marine features. Place Names : Turns the local area names On or Off. -
Page 90: Chart Settings
The Boundaries Mode setting of Auto, with Chart Boundaries set to On, provides a combination believed to be adequate for the majority of situations where you want to display the Chart Boundaries. CPN700i and CPN1010i Multimedia Chart Plotters Page 91... -
Page 91: Underwater Objects Settings
VAD Boundaries : Turns the Value Added Data Boundaries On or Off. The Value Added Data (VAD) is a collection of additional cartographic objects which are not present on the original paper chart. These objects have been obtained from other sources and then merged to the C-MAP 4D charts in order to provide more information useful for the navigation. -
Page 92: Chart/Highway Page
2. Tap on COMPASS. The Compass Page appears. Data Boxes on the Compass Page can be customized, except for Latitude, Longitude, GPS Status, COG and BRG. Tapping anywhere on the screen brings up the Soft Key. CPN700i and CPN1010i Multimedia Chart Plotters Page 93... -
Page 93: Gps Status Page
GPS Status Page This page is used as a reference to see how well the GPS is receiving satellites. 1. Press the key, tap on Navigation. 2. Tap on GPS. The GPS Status Page appears. Data Boxes can be customized, except for Latitude, Longitude and GPS Status. -
Page 94: Waas/Egnos Setting
Soft Keys to appear, and then tap on the desired Soft Key to select the NMEA Display Page you want, for example tap on the Soft Key to open NMEA Display Page with six boxes. See the following picture. CPN700i and CPN1010i Multimedia Chart Plotters Page 95... -
Page 95: Customizing Data Box In The Nmea Display Page
When going to a destination, 3 BOXES is useful to navigate as to get to the destination keep the Course Over Ground (COG) and Bearing (BRG) figures the same. Customizing data box in the NMEA Display Page To customize data box please follow the procedure below: 1. -
Page 96: Fish Finder (Optional Ff525 Required)
The Tide Page contains Tide information critical for safe navigation. It is also useful for boaters that are concerned about the height of the water under a bridge or by fisherman that CPN700i and CPN1010i Multimedia Chart Plotters Page 97... -
Page 97: Vhf Digital Selective Calling
wish to know the tide and moon phase of a specific date. 1. Press the key, tap on Tide. 2. Tap on TIDE. The page appears and includes information on the moon phase with image, rise and set times and also rise and set times of the sun with an image of the sun. Moving the ShuttlePoint Knob left and right controls the Tide Prediction time (see... -
Page 98: Nmea 0183 Interfacing
NMEA 0183 Interfacing To take advantage of these functions the CPN Series Chart Plotter must be interfaced (wired) to a STANDARD HORIZON or compatible DSC VHF. Refer to Connections section for connection example. Distress Call CPN Series Chart Plotters are able to display the location of a vessel in distress when interfaced to a compatible DSC VHF with NMEA 0183 output and the radio receives a DSC Distress Call. -
Page 99: Dsc Directory
DSC Directory CPN Series Chart Plotters are able to display the DSC Directory. From this page the user can assign the Vessel Name, Contact Name and Phone number to any MMSI (Maritime Mobile Service Identity) so that, when a DSC Distress Call or Position Request is received, the name of the vessel is displayed in place of the MMSI number - a unique number that is assigned to a DSC radio station for use in emergency situations. -
Page 100: Video Adjustment Mode
1. Press the key, tap on Page Icon Video Input. 2. Select the video image type: for CPN700i tap on VIEW1 or PIP1, for CPN1010i tap on VIEW1, VIEW2, PIP1 or PIP2 as you want. After video image type has been selected, the CPN Series Chart Plotter will show a Warning... -
Page 101: Advanced Settings
ADVANCED SETTINGS The Advanced Setup menu allows customization of many GPS functions, Alarms and NMEA interfacing. 1. Press the key, tap on Setup Menu. 2. Tap on ADVANCED. While in this menu you will see many selections which are described in the next sections. NAVIGATE MENU The Navigate menu allows customization of the Coordinate System (Loran TD's), Chart Datum, Chart Orientation Resolution (angle the vessel has to change before the chart is... -
Page 102: Compass (Cog) Setup
· Fish Finder FF525 50/200kHz BLACK BOX** - refer to Fish Finder Owner’s Manual · AIS 38400 - AIS Receiver · Disabled - allows the port to be disabled. * RS232 not opto-isolated electrical interface. ** Not available on Port 4. CPN700i and CPN1010i Multimedia Chart Plotters Page 103... -
Page 103: Nmea 0183 Output Sentences
NMEA 0183 output sentences The ports may be setup to output NMEA sentences. The table below shows the default setting each port: Sentence Port1 Port2 Port3 Port4 ALARMS This menu is used to select and setup audible and visual alarms. See the following table: Arrival Alarm: Alerts when the vessel is approaching a single destination point or when arriving at a leg in a Route. -
Page 104: Simulation
Navigating a Route in Simulation mode This selection allows you to navigate to a saved Route to see how data windows on the Chart Page and operation of the Compass and Highway pages. CPN700i and CPN1010i Multimedia Chart Plotters Page 105... -
Page 105: Dsc Polling
1. Create a Route. 2. Press the key, tap on Setup Menu. 3. Tap on ADVANCED. The Advanced Setup menu appears. 4. Tap on SIMULATION. The simulation menu appears. 5. Tap on SIMULATION MODE. 6. Tap on Route. A window with the Route(s) that are stored in the CPN Series Chart Plotter’s memory appears. -
Page 106: Dam Report Page
None (the purchase type is not defined) · Built-In Charts Yes (the chart is stored in the CPN Series Chart Plotter memory, it could be also in the remote CPN Series Chart Plotter) CPN700i and CPN1010i Multimedia Chart Plotters Page 107... -
Page 107: Ais
Chart Page and AIS list pages when connected to a AIS receiver (GX2100 or GX2150 STANDARD HORIZON VHF/AIS transceiver) or transponders which output NMEA 0183 VDM sentence at 38400 or 4800 baud. The CPN Series Chart Plotters are able to show targets from both Class A (commercial) and Class B targets. -
Page 108: Menu
QUICK INFO ON AIS TARGET Tap on a AIS Target icon, the following information is displayed. The selected AIS Target icon is surrounded by a square frame when user places the cursor over the icon. CPN700i and CPN1010i Multimedia Chart Plotters Page 109... -
Page 109: List
LIST It is possible to display the AIS List page that shows basic information of the Target ship with the ability to select a Target ship and locate it on the chart. To select this page follow the procedure: 1. Press the key, move the ShuttlePoint Knob or tap on the right top arrow to scroll the Pages Icons to display AIS and tap on it. - Page 110 CPN700i and CPN1010i Multimedia Chart Plotters Page 111...
-
Page 111: Connection Manager
CONNECTION MANAGER GETTING STARTED The Getting Started section will take you through frequently used operations using the ® Connection Manager. The Connection Manager allows you to connect to a Wi-Fi Hot spot and to share information between two CPN Series Chart Plotters. STARTING THE CONNECTION MANAGER There are two ways to access the Connection Manager, follow the procedure below: From the Chart Plotter Mode... -
Page 112: Connection Manager Overview
Hotspot. STANDARDS SUPPORTED ® Wi-Fi The CPN Series Chart Plotter is certified to work with the following standards on the basis of the Wi-Fi ® Alliance specification, see the following table: CPN700i and CPN1010i Multimedia Chart Plotters Page 113... -
Page 113: Connection Manager Controls
Standard Frequency Speed (Mbit/s) 802.11b 2,4 GHz 1, 2, 5.5, 11 802.11g 2,4 GHz 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 802.11n 2,4 GHz, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, 5,4 GHz CONNECTION MANAGER CONTROLS HOW TO CONNECT... -
Page 114: Authentication/Encryption Protocols
Wi-Fi Protected Access® II Pre-Shared Key / Temporary Key Integrity Protocol Requires a 256 bit network key to authenticate WPA2-PSK Wi-Fi Protected Access® II Pre-Shared Key /Advanced Encryption Standard Requires a 256 bit network key to authenticate CPN700i and CPN1010i Multimedia Chart Plotters Page 115... -
Page 115: Networking Connection: C-Map 4D Charts, Nmea & Fish Finder Data Sharing
NETWORKING CONNECTION: C-MAP 4D CHARTS NMEA & FISH FINDER DATA SHARING The CPN Series Chart Plotter may be setup to share optional C-MAP 4D charts, NMEA 0183 GPS & Fish Finder data (Depth, Temperature and Speed depending on transducer). Data sharing is accomplished between two (only) CPN Series Chart Plotters, one set up as Chart Plotter 1 (the one with the card inserted) and the other as Chart Plotter 2 (the other with no chart inserted). -
Page 116: Chart Plotter 1 Setup (With C-Map 4D Card Inserted)
Tap on to close the window. 4. Tap on one of the GPS Source options - among Internal Antenna, External Antenna or 2nd CPN - to select the desired vessel position source. CPN700i and CPN1010i Multimedia Chart Plotters Page 117... - Page 117 The proper GPS Source settings depend on the CPN Chart Plotter installation on the vessel. This setting can be changed anytime from the GPS page in the Chart Plotter application. For more information see Setup Menu into the GPS Status Page paragraph. 5.
-
Page 118: Chart Plotter 2 Setup (No Chart Inserted)
This setting can be changed anytime from the GPS page in the Chart Plotter application. For more information see Setup Menu into the GPS Status Page paragraph. 5. Tap on the NETWORK tab (see I) to configure the network settings: CPN700i and CPN1010i Multimedia Chart Plotters Page 119... - Page 119 6. Tap on Chart Plotter 2 to select this CPN Series Chart Plotter as Chart Plotter 2 (see L). 7. Tap on the Soft Key (see L). If the Chart Plotter number is changed from Chart Plotter 1 to Chart Plotter 2 or vice versa, the following warning popup window appears: Tap on to apply the changes and restart the CPN Series Chart Plotter.
-
Page 120: Custom Setup
PAIRING THE CPN MULTIMEDIA CHART PLOTTERS WITH Bluetooth WIRELESS TECHNOLOGY ® It is possible to pair the CPN700i or CPN1010i Multimedia Chart Plotters with a Bluetooth ® wireless mouse and/or keyboard following the procedures below. ® During the pairing process the Bluetooth device must be in Discovery Mode (it might be called slightly different depending on the device manufacturer). -
Page 121: Pairing Bluetooth Device
3. The Soft Key displayed at the bottom right corner of the screen (see C) switches the ® Bluetooth wireless device OFF or ON. The Soft Key indicates the status of the ® Bluetooth wireless device after pressing the Soft Key: ®... - Page 122 Please drag the Authentication window up until is visible. If the Authentication process is succesfully completed, the device will be moved in the Trusted list on the right (see H): CPN700i and CPN1010i Multimedia Chart Plotters Page 123...
-
Page 123: Unpairing Bluetooth Device
UNPAIRING Bluetooth DEVICE ® To unpair the CPN700i or CPN1010i Multimedia Chart Plotters with a Bluetooth ® wireless mouse and/or keyboard to which it was previously paired, follow the procedure below: 1. -
Page 124: Internet Browser
Start Up screen. From the Start Up Page 1. Turn on the CPN Series Chart Plotter. 2. When the Start Up display is shown, tap on the Browser Icon (see A). CPN700i and CPN1010i Multimedia Chart Plotters Page 125... -
Page 125: Browser Overview
Internet Navigation from the Chart Plotter While in Chart Plotter Mode press the Intelligent key. Tap on Browser Icon to open the Browser application. Tap on to close the Browser and go back to the Start Up Screen. BROWSER OVERVIEW The Browser Home page is displayed when the Browser is launched (see B). -
Page 126: Internet Browser Controls
INTERNET BROWSER CONTROLS CPN700i and CPN1010i Multimedia Chart Plotters Page 127... -
Page 127: How To Navigate
HOW TO NAVIGATE At this point you can start the Internet navigation by typing the desired URL (web site address) in the address line. A touchscreen keyboard appears to allow the insertion of the address: when finished tap on , the keyboard disappears. Tapping on places the keyboard on the bottom and top side of the screen. -
Page 128: The Signal Indicator Icon
Tap on the Soft Key to save the change and close. · tap on the Soft Key to exit. · to access the browser History list, tap on History (see C): CPN700i and CPN1010i Multimedia Chart Plotters Page 129... -
Page 129: The Download Manager
You can recall a page tapping on it from the list or clear the history by tapping on the Soft Key (see D). DOWNLOAD MANAGER This section will show how to download files from a website. The CPN Series Chart Plotters are capable of downloading the following files. - Page 130 Download Manager page where a warning message is displayed (see B). To go on, it is necessary to delete a file, by using the Delete icon which allows file removing. CPN700i and CPN1010i Multimedia Chart Plotters Page 131...
- Page 131 If you tap on the Delete icon, two Soft Keys are shown (see C), to confirm deletion or not. After file deletion, tap on the Resume icon, to start the downloading again. The downloaded files are ONLY available when the Browser is open. When the Browser is closed the files will be deleted.
-
Page 132: Media Player
From the Chart Plotter Mode 1. Press and hold the PWR key. The display shows the window below: 2. Tap on to display the Start Up screen. CPN700i and CPN1010i Multimedia Chart Plotters Page 133... -
Page 133: Media Player Controls
From the Start Up Page 1. Turn on the CPN Series Chart Plotter. 2. When the Start Up display is shown, tap on the Multimedia Icon (see A). Simultaneous Multimedia Music and Chart Plotter While in Chart Plotter Mode press the Intelligent key. - Page 134 CPN700i and CPN1010i Multimedia Chart Plotters Page 135...
-
Page 135: Saving Files On A Usb Thumb Drive
SAVING FILES ON A USB THUMB DRIVE You can save audio, video or image files on a USB Thumb Drive, and then read and play these files on the CPN Series Chart Plotter. To save files on a USB Thumb Drive please follow the procedure expalined in the example below which refers to a PC with Windows XP Operating System. -
Page 136: Viewing And Playing Files
3. Tap on the USB device icon to see the folders saved on the device (see B): 4. Tap on the folder to be viewed (example Music), see C: 5. Tap on the Multimedia file to play (see D): The selected Multimedia file will automatically begin to play. CPN700i and CPN1010i Multimedia Chart Plotters Page 137... -
Page 137: Installation
INSTALLATION MOUNTING THE CPN SERIES CHART PLOTTER The CPN Series Chart Plotters are supplied with a swivel mounting bracket which allows them to be dash mounted. When flush mounting, the optional GPS Antenna may be needed to receive GPS satellite signals. Refer to the images below for bracket installation: When choosing a location to bracket mount a CPN Series Chart Plotter it is advisable to temporarily connect the plotter to power, enter Chart Plotter mode and check the signal strengths by touching on the Navigation icon, and touching the GPS Status icon. -
Page 138: Flush Mounting The Cpn Series Chart Plotter
FLUSH MOUNTING THE CPN SERIES CHART PLOTTER The CPN Series Chart Plotters are supplied with a flush mount cutout template and a flush mount kit. Refer to the images below as a guide to installing. CPN700i and CPN1010i Multimedia Chart Plotters Page 139... - Page 139 Before drilling holes make sure there is enough room to mount the CPN Series Chart Plotter and there are no obstructions. 1. After a location is found, peel the template label from the backing and apply the label to the mounting area. 2.
-
Page 140: Mounting The Optional External Gps Antenna
4. Insert the cable into the 0.78” (20mm) hole and route to the CPN Series Chart Plotter. 5. Apply a small amount or RTV to the underside of the antenna and place onto mounting surface. Allow time for the antenna to adhere to the mounting surface. CPN700i and CPN1010i Multimedia Chart Plotters Page 141... -
Page 141: Connections
· NMEA 0183 Devices (VHFs, AIS Receiver, Digital Instruments and Autopilots) · Optional FF525 BLACK BOX FISH FINDER · Optional Video Camera · Optional monitor with VGA input (CPN1010i) · Optional GPS Antenna · Optional Audio Amplifier and speakers · Optional USB memory stick ·... -
Page 142: Battery Connections
4. This cable has many wires, however only the RED and BLACK wires are used to connect to a switched battery supply. Refer to the following images. For additional connections refer to NMEA 0183 Connections section. CPN700i and CPN1010i Multimedia Chart Plotters Page 143... -
Page 143: Warning: Product Installation And Operation
Warning: product installation and operation This product must be installed by professional personnel in accordance with the instructions provided. Failure to do so could result in personal injury, damage to your boat and/or poor product performances. Warning: product grounding Before powering this product, please make sure it is correctly grounded to your Boat Ground following the installation instructions below. - Page 144 2. Please connect the RED wire of the Power Cable at its termination to the Boat Ground. 3. Please connect the BLACK wire of the Power Cable at its termination to the Boat Ground. If not available, it could be the engine chassis. CPN700i and CPN1010i Multimedia Chart Plotters Page 145...
-
Page 145: Nmea 0183 Connections
4. Please connect the RED and BLACK wires of the Power Cable respectively to the positive and negative poles of the Boat Battery. In the pictures indicates Boat Battery, Boat Ground and Power Cable. NMEA 0183 CONNECTIONS The CPN Series Chart Plotter are supplied with two accessory cables. These two cables may be connected to PWR/ACC1 or ACC2 connections. - Page 146 CPN700i and CPN1010i Multimedia Chart Plotters Page 147...
-
Page 147: Pwr/Acc1 Connections
PWR/ACC1 Connections PWR/ACC1 contains 3 NMEA RS232 type outputs and 2 NMEA RS232 type inputs (RS232 has one common NMEA Signal ground). ACC 2 Connections ACC2 contains 1 NMEA RS422 (A and B signal wires) type Port. PORT Input selections Each Port may be configured to be able to connect to specific devices: ·... -
Page 148: Cpn Series Chart Plotter To Nmea 0183 Connection Examples
By default the CPN Series Chart Plotters PWR/ACC1 Port 2 connection is set to Fish Finder. When an optional FF525 is connected Port 2 Input (Gray) and Output (White) wires are not used for connections to other devices. CPN700i and CPN1010i Multimedia Chart Plotters Page 149... - Page 149 Page 150 Owner’s Manual...
-
Page 150: Video Input Connector
1 NTSC or PAL Compatible Input: NTSC or PAL video input allows a camera, DVD or VCR to be connected. To connect a video source use the optional ACVC10 cable (3 pin to RCA phone adapter). CPN700i and CPN1010i Multimedia Chart Plotters Page 151... -
Page 151: Video Input/Output Connections For Cpn1010I
DVD or VCR to be connected. To connect a video source use the optional ACVC10 cable (3 pin to RCA phone adapter). The CPN1010i VGA output resolution is 1024x600. To be able view the CPN1010i display, the monitor (or TV) must be selected to a resolution of 1024x600. -
Page 152: Cpn Pre-Amp Connector Pin Out
The Thumb Drive may be loaded with the movies, pictures and songs from a PC before inserting and be accessed using the Media Player (refer to Media Player section). Below is an example of USB Thumb Drive connection: CPN700i and CPN1010i Multimedia Chart Plotters Page 153... -
Page 153: Optional External Alarm Connection
OPTIONAL EXTERNAL ALARM CONNECTION OPTIONAL GPS ANTENNA Refer to Optional WAAS GPS Receiver section. OPTIONAL FF525 BLACK BOX FISH FINDER Refer to Optional FF525 FISH FINDER section. Page 154 Owner’s Manual... -
Page 154: Second Cpn To Share C-Map 4D Charts, Nmea & Ff Data
C-MAP 4D Charts, NMEA & Fish Finder Data Sharing. NMEA 2000 DEVICES and ETHERNET RADAR (for future release) Standard Horizon will be releasing software updates the CPN Series Chart Plotters which will allow connection of NMEA 2000 devices and Ethernet Radar. Check with your dealer or visit www.standardhorizon.com in the CPN700i or CPN1010i sections for updates. -
Page 155: Specifications
SPECIFICATIONS CPN700i Power Supply : 12-24 VDC Power Consumption : 11W max Current Draw: 0.92A@12VDC Display : 7” Wide VGA Resolution: 800x480 Sunlight viewable Backlight: LED (1000nits) Touch screen: Capacitive Cartography : C-MAP 4D SD CARD Operating temperature range : 32°F/+131°F (0°C/+55°C) Storage temperature : -4°F/+158°F (-20°C/+70°C) Keyboard... -
Page 156: Dimensions
: -4°F/+158°F (-20°C/+70°C) Keyboard : Silicon rubber, LED backlight Weight (without bracket) : 4.4 lbs (2000 gr) User Points (Marks/Waypoints): 10000 Routes : 50 Track Points : 10000 (recordable in 20 Tracks) CPN700i and CPN1010i Multimedia Chart Plotters Page 157... -
Page 157: Dimensions
NMEA 0183 Output sentences : GLL, VTG, BWC, WCV, APA, APB, HDG, BOD, XTE, RMA, RMB, RMC, GGA, HSC, DBT, DPT, MTW, VHW. NMEA 0183 Input sentences : BWC, DBT, DPT, DSC, DSE, GGA, GLL, GSA, GSV, HDG, HDM, HDT, MTW, MWD, MWV, RMC, RTE, TLL, VDM, VHW, VTG, VWR, VWT, WPL NMEA 2000 : To be determined in future software release... -
Page 158: Optional Ff525 Fish Finder
: 5Feet at 50kHz, 2.5Feet at 200kHz Maximum Depth : 1500Feet at 50kHz, 700Feet at 200kHz Airmar X-DUCER ID : Must use Standard Horizon transducers part numbers Advanced Digital Signal Processing Speed & Temperature Sensor (if available on transducer) Alarms (shallow water, depth, Fish, temp) -
Page 159: Optional Waas Gps Receiver
OPTIONAL WAAS GPS RECEIVER This optional WAAS GPS Receiver is based on a ultimate GPS engine that delivers accuracy better than 10 Feet by decoding the GPS correction signals from the satellite- based WAAS (Wide Area Augmentation System). The GPS engine, interface electronics and the passive antenna are enclosed inside the waterproof plastic housing. -
Page 160: Gps Connection Image
< 1 second Hot Start 1 second Warm Start 29 seconds Cold Start 29 seconds Accuracy < 10 Feet with SBAS < 2.0m NMEA Output Messages GGA, RMC, GSA, GSV, TXT GPS CONNECTION IMAGE CPN700i and CPN1010i Multimedia Chart Plotters Page 161... -
Page 161: Technical Tests
Test it is needed to hold any key while the Chart Plotter application is starting: 1. Select the Start Up page. 2. Tap on the Plotter Icon , when the STANDARD HORIZON sunrise page is shown, press and hold the key until the System Test display is shown, then let go of the key. -
Page 162: Backlight
SD CARD zone and the message "Faulty" are shown. 3. if there is not any SD CARD inserted in the slot, the message "not present" is shown. SERIAL PORTS (USED BY STANDARD HORIZON TECHNICIANS) If you are having problems receiving data from the position-finding instrument, this test should help determine the problem. -
Page 163: System Update
SYSTEM UPDATE SYSTEM UPDATE PROCEDURE After downloading the Installation Package or contacting your dealer to obtain the proper Installation Package, follow the procedure below to update the system: 1. Install the Installation Package on a SD CARD. 2. Press the PWR key to turn the CPN Series Chart Plotter Off. -
Page 164: System Update Error Messages
· Error 01 - INFO.DAT file not found The file info.dat was not found on the memory device · Error 02 – INFO.DAT file corrupted The file info.dat on the memory device is corrupted CPN700i and CPN1010i Multimedia Chart Plotters Page 165... -
Page 165: Error Message 08
· Error 03 ATTENZIONE: file di aggiornamento non valido per questo dispositivo WARNING: wrong update file ATTENTION: fichier de mise à jour non compatible avec ce dispositif WARNUNG: falsche Updateakte CUIDADO: ficheros de actualizaciòn no validos para este dispositivo ATENÇÃO: dados de atualização não válidos para este dispositivo The Installation Package on the memory device is not suitable for the CPN Series Chart Plotter ·... - Page 166 Plotter and then follow the procedure: 1. Download the Installation Package and install it on the SD CARD (or contact your dealer to obtain the proper Installation Package). 2. Execute the installation procedure. CPN700i and CPN1010i Multimedia Chart Plotters Page 167...
-
Page 167: Terms
TERMS ® AES (Advanced Encryption Standard) – Is the Wi-Fi authorized strong encryption standard. It uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters. ALT (Altitude) – Shows the Altitude of the GPS Antenna on the mean sea level. It i received from GPS, sentence GGA. - Page 168 WAAS-enabled GPS receiver can read the signal. WATER TEMP – Shows the sea water temperature when the FF525 50/200kHz BLACK BOX FISH FINDER or a Digital Speed Log/Temp instrument with NMEA is connected. CPN700i and CPN1010i Multimedia Chart Plotters Page 169...
- Page 169 WEP (Wired Equivalent Privacy) – Open System authentication: the WLAN client need not provide its credentials to the Access Point during authentication. Thus, any client, regardless of its WEP keys, can authenticate itself with the Access Point and then attempt to associate.
-
Page 170: Analytical Index
Caribbean ............. 11, 38 ASF1/2 ............... 102 cartographic objects ............ 89 Attention Areas ............. 89, 90 Cartography ............... 156 Audible Alarm ............104 cartography ............11, 16 audio ................11 Category ..............50 CPN700i and CPN1010i Multimedia Chart Plotters Page 171... - Page 171 CPA Alarm ............108, 109 Central America ............ 11, 38 CPA Limit ............108, 109 Chain ..............34, 102 CPN1010i ............11, 152 change a page ..........27, 30, 100 CPN700i ............ 11, 151, 156 Change Parameters ..........163 CREATING A ROUTE .......... 66, 68 change the fields ............
- Page 172 Error 07 ..............166 GOTO ..............20, 73 Error 08 ..............166 GOTO A ROUTE ............75 Error 09 ..............166 GOTO CURSOR ............74 Error 20 ..............166 GOTO Key ..............15 CPN700i and CPN1010i Multimedia Chart Plotters Page 173...
- Page 173 GOTO MARK ............... 76 Intertidal Areas ............70 GOTO popup window ..........75 IP57 waterproof ............11 GPS ...... 11, 26, 32, 92, 94, 138, 161, 168 ISO 9001 ..............41 GPS ANTENNA ............154 ISO Certification ............41 GPS Antenna ........... 138, 142, 168 Italian ................
- Page 174 Power Cable ............. 145, 146 NOAA ............. 34, 37, 58 Power Key ..............16 Normal ..............34, 37 Power supply ............ 156, 157 North Up ............30, 57, 58 POWER UP ............14, 164 CPN700i and CPN1010i Multimedia Chart Plotters Page 175...
- Page 175 Powering Off ..............14 Sail boat ............12, 30, 58 PRE-AMP OUTPUT ........... 152 Satellite ................ 53 Production Installation ..........70 satellite ............... 41, 116 Programmed Date ............. 107 Satellite Images ............ 11, 42 Property Status ............107 Satellites ..............103 Puerto Rico ............
- Page 176 VHW ............104, 156, 158 touchscreen keyboard .... 50, 51, 62, 63, 67, 106 VIDEO ............... 100, 101 Touchscreen Keys ............17 Video adjustment mode ..........101 Towers ................. 88 Video Camera ............142 CPN700i and CPN1010i Multimedia Chart Plotters Page 177...
- Page 177 VIDEO INPUT ............151 WCV ............104, 156, 158 Video Input ............11, 83 Weight .............. 156, 157 VIDEO INPUT CONNECTIONS ........ 151 WEP ............114, 115, 170 VIDEO INPUT CONNECTOR ........151 WGS 1984 ..............102 Video Input menu ............100 Wi-Fi®...
- Page 178 United States: To receive warranty service, the purchaser must deliver the Product, transportation and Insurance prepaid, to STANDARD HORIZON (Marine Division of YAESU USA) - Attention Factory Service - 6125 Phyllis Drive - Cypress, CA 90630, include proof of purchase indicating model, serial number and date of purchase.
-
Page 179: Declaration Of Conformity
Directive 1999/5/EC, with the provisions of Annex III (Conformity Assessment procedure referred to in article 10) Type of Equipment: Chart Plotter for Marine Navigation with internal GPS receiver Brand Name: Standard Horizon Model Number CPN700i Manufacturer TWS S.r.l... - Page 180 Winnall Close, Winchester SO23 0LB Technical Construction File: Issued by Yaesu Musen Co., Ltd., Tokyo, Japan File No: UK10101111 Drawn up in: Winchester, United Kingdom Date: January 2012 Name and position: PCJ Bigwood, Technical Sales Manager CPN700i and CPN1010i Multimedia Chart Plotters Page 181...
Need help?
Do you have a question about the CPN1010i and is the answer not in the manual?
Questions and answers