Dsc Polling; About Page - Standard Horizon CPN1010i Owner's Manual

1. Create a Route.
2. Press the
3. Tap on ADVANCED. The Advanced Setup menu appears.
4. Tap on SIMULATION. The simulation menu appears.
5. Tap on SIMULATION MODE.
6. Tap on Route. A window with the Route(s) that are stored in the CPN Series Chart
Plotter's memory appears.
7. Tap on the desired Route.
8. Tap on SPEED.
9. The touchscreen keyboard appears. Enter in the speed you want to vessel to travel at
in simulation mode; when finished tap on
10. Tap on to exit to the last selected page.

DSC POLLING

This menu is used to enable or disable features related to the DSC function.
Auto Position: Selects between Manual or Auto. When Auto Position item is set to Manual and the CPN Series
Chart Plotter receives a DSC Position Request or Distress Call from a connected VHF radio, a
popup window will not be displayed. When the Auto Position is set to Auto, the CPN Series Chart
Plotter works as follows:
Auto Info: Enables or disables the Auto Info. This selection is available only when Auto Position is set to
Manual. If Auto Info is set to On, when receiving the Position Request it is possible to center the
cursor over the top of the Position Request icon and show the Position Request popup window

ABOUT PAGE

The About page contains Software, Chart and optional devices information. To select the
About Page follow the procedure below:
1. Press the
2. Tap on the right bottom arrow to scroll the Desktop Icons to display ABOUT and tap on
it. The About page appears on the screen (see A).
3. Tap anywhere on the screen to display the Soft Keys on the bottom of the page (see B):
· the
· the
copyright and license type. Use the
and the
· ONLY FOR AMERICA USERS: the
a optional SD CARD for updating purposes.
· the
· the
Page 106
key, tap on Setup Menu.
a : when receiving the DSC Distress or Position Request, a popup window is displayed;
b : if VIEW ON CHART is selected, the position is indicated on the chart marked with "P" or
"D". The cursor is moved to the point "P" and shows the point in the center of the screen;
c : when moving the cursor from "P", the location can be confirmed. At this time, the same
MMSI Position Request data that were received before are remaining and displayed.
key, tap on Setup Menu.
Soft Key starts Fish Finder firmware update procedure.
Soft Key opens the License Page which lists the legal information as
Soft Key to exit and return to the About page.
Soft Key opens the Data Access Manager Report Page
Soft Key starts the Safety Remove Data Cartridge procedure.
, the keyboard disappears.
and Soft keys to scroll the page
Soft Key saves the Built-In Chart to
Owner's Manual