Table of Contents
Advertisement
If no data/time is available from the GPS or the GPS Chart Plotter is not in Simulation mode,
the icon on the chart is generic one. The color of the arrow denotes the strength of the current
as follows:
When the GPS Chart Plotter receives a valid position fix, the Tide icons are shown on the
charts on the basis of the current date and time: the screen displays and changes arrows
as date/time changes.
It is possible to see the variation of the Tidal arrows on the selected area at any given time.
To activate this function follow the procedure:
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight CURRENTS PREDICTION and press [ENT] or
move the ShuttlePoint knob to the right.
4. A window is shown on the low-left side of the chart. Press [ENT] to set the date and time
manually, and [GOTO]/[MENU] to increase/decrease time; press [CLR] to exit.
6.0.8
Chart Language
The CP190i and CPF190i may be customized to show the local language of the chart.
To select the Chart Language you want:
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight CHART LANGUAGE and press [ENT] or move
the ShuttlePoint knob to the right. A new popup window will appear on the screen. The
available functions are described in the following table.
Language
: Allows setting the language to display chart information. The language is chosen among the list
of languages available on the cartographic data (data cartridge or embedded charts).
Mode
: Defines how objects are translated. Selections are:
CP190i and CPF190i
Figure 6.0.7 - Tidal stream arrows
Figure 6.0.7a - Tidal stream arrows table
Page 55
Advertisement
Table of Contents
