General Operation; Manual Conventions; Power Up Sequence; Powering Off - Standard Horizon CPN1010i Owner's Manual

GENERAL OPERATION

MANUAL CONVENTIONS

This Owner's Manual includes information for both the 7inch CPN700i and 10inch
CPN1010i Multimedia Chart Plotters which are referenced to CPN Series Chart Plotters
throughout this manual. In addition when a word(s) is bold and underlined it is referring to
a menu selection on the display.

POWER UP SEQUENCE

1. Press the PWR key until the display shows the Splash Screen page (see A). In case
of error messages please refer to System Update Error Messages paragraph.
2. After about 1 minute the Splash Screen will change to show the Start Up Screen (see B).
This page allows selection of the Chart Plotter, Media Player (video, audio and images),
Internet Browser and Connection Manager (for Wi-Fi
If a selection is not made within 30 seconds, the CPN Series Chart Plotter automatically
changes to Chart Plotter Mode.

POWERING OFF

1. The CPN Series Chart Plotters have three operations. The GPS Chart Plotter Mode,
Internet and Multimedia modes. When the CPN Series Chart Plotter is in any of these
modes and the
2. To turn off the CPN Series Chart Plotter, tap on
tap on
Page 14
PWR key is pressed and held, a Shut Down window will be shown:
. To exit from the Shut Down menu, tap on
® ®
, Bluetooth and Ethernet setup).
. To show the Start Up page
Owner's Manual
.