Table of Contents
Advertisement
3. Move the ShuttlePoint knob to highlight CURRENTS PREDICTION and press [ENT] or
move the ShuttlePoint knob to the right.
4. A window is shown on the high-left side of the chart.
5. Press [I
. T
NCR
IME
Press [D
. T
ECR
IME
Press [S
T
ET
IME
a. Press Alphanumeric key or move the ShuttlePoint knob up or down to select the
number in the date.
b. To select the next number in the Date field, move the ShuttlePoint knob to the right
and repeat step a. until the date is shown.
c. To store the date press [ENT] and the Time will be selected.
d. Press Alphanumeric key or move the ShuttlePoint knob up or down to select the
number in the Time.
e. To select the next number in the Time field, move the ShuttlePoint knob to the right
and repeat step a. until the time is shown.
f.
To store the Time, press [ENT] and Speed (SPD) and Direction (DIR) will be
updated in the table.
6. Press [E
].
XIT
6.0.8
Chart Language
The CP590 may be customized to show the local language of the chart. To select the Chart
Language you want:
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight CHART LANGUAGE and press [ENT] or move
the ShuttlePoint knob to the right. A new popup window will appear on the screen. The
available functions are described in the table below.
Language
: Allows setting the language to display chart information. The language is chosen among the list
of languages available on the cartographic data (data cartridge or embedded charts).
Mode
: Defines how objects are translated. Selections are:
4. After the selection is made, press [CLR] repeatedly or move the ShuttlePoint knob to
the left repeatedly until the Chart page is shown.
a. When the Chart Language is changed, the following settings are automatically selected: MODE
is set to Off and Chart Language is set to your selection.
b. If the C-CARD is removed or changed, the Chart Language should be confirmed and changed
if necessary.
6.0.9
Pictures or Diagrams
Using optional C-MAP B
on the CP590 display. These Pictures are typically used to facilitate the identification of
cartographic objects or places around the chart: they can be the landscape layout nearby
CP590
] to increase the time in 30 minute increments.
] to decrease the time in 30 minute increments.
] to change the date and time manually.
Off
: Enables the language chosen in the Language menu above. If the selected
language is not present on the objects information, English is used.
English : Always uses English.
Local : Uses the Local language present on C-MAP B
language is available, English is used.
J
MAX data cards allows you to show pictures or diagrams
Y
EPPESEN
NOTE
J
C-CARD. If no Local
Y
EPPESEN
Page 55
Advertisement
Table of Contents
