Customizing The Soft Keys; Other Settings In General Setup Menu - Standard Horizon CP500 Owner's Manual

3.7

CUSTOMIZING THE SOFT KEYS

The Soft Keys can be individually customized from the default pages (discussed above) to
the following: CHART, DUAL CHART, CHART/COMPASS, CHART/HIGHWAY, NAVIGA-
TION, HIGHWAY, CELESTIAL, GPS STATUS, DSC LOG, DSC DIRECTORY, NMEA
DISPLAY, NMEA DATA, DEPTH TREND, WIND SPEED TREND, TEMP TREND, SOG
TREND, MARKS/WAYPOINTS, USER C-CARD, AIS LIST, FIND and VIDEO INPUT.
When the Optional FF525 (or FF520) 50/200kHz BLACK BOX FISH FINDER is connected,
any Soft Key can be customized to show FISH FINDER 50kHz, FISH FINDER 200kHz, FISH
FINDER 50/200kHz, FISH FINDER 50kHz/CHART, FISH FINDER 200kHz/CHART screens.
Also when a SI-TEX RADAR Antenna is connected (USA only), any Soft Key can be
customized to show Radar pages, RADAR FULL, RADAR/CHART, RADAR OVERLAY and
RADAR/FISH FINDER.
1. To change, momentarily press any of the Soft Keys, then press and hold the Soft Key
you want to customize.
2. A popup window will be shown with the above settings.
3. Move the ShuttlePoint knob up or down to select the desired page.
4. Press [ENT] or move the ShuttlePoint knob to the right to save the page to the selected
Soft Key.
3.8

OTHER SETTINGS IN GENERAL SETUP MENU

The GENERAL SETUP menu has other selections that allow you to customize:
TIME SETUP
DATE FORMAT
COURSE UP/NORTH UP
KEYPAD BEEP
UNITS OF MEASURE
NAV AIDS PRESENTATION Allows the Nav Aids presentation to be drawn using NOAA symbology when US is
Page 30
AIS LIST
Figure 3.7 - Window options of the selected Soft Key
Selects a sub-menu to allow the time setup. It is possible to choose the Time Zone, select
the Daylight Saving among On/Off/Auto and the Time Format, switching 12 or 24 hours
time format.
Allows choosing date format MM-DD-YY or DD-MM-YY.
Selections are North Up (the Top of the page is fixed to North) or Course Up (the top of
the page is orientated to the direction the vessel is heading).
Allows the beep produced when a key is pressed to be turned on or off.
Units of Measure can be selected for Distance, Speed, Depth, Altitude and Temperature.
selected or International symbols will be used when International is selected. When
selected these functions affect how the icons for Lights, Signals, Buoys and beacons are
displayed.
WAAS 3D
R
CP500