Settings In General Setup Menu - Standard Horizon CP300i Owner's Manual

2. A popup window will be shown with the above settings.
3. Move the ShuttlePoint knob up or down to select the desired page.
4. Press [ENT] or move the ShuttlePoint knob to the right to save the page to the selected
Soft Key.
3.8

SETTINGS IN GENERAL SETUP MENU

The GENERAL SETUP menu has other selections that allow you to customize the display.
All selections are listed below:
TIME SETUP
DATE FORMAT
COURSE UP/NORTH UP
KEYPAD BEEP
UNITS OF MEASURE
NAV AIDS PRESENTATION Allows the Nav-Aids presentation to be drawn using NOAA symbology when US (default)
DISPLAY COLOR
SHIP ICON
CURSOR SPEED
MEASURE DISTANCE
Page 38
Select the Time Zone offset, enable or disable Daylight Savings Time and select the
Time Format (switch between 12 or 24 hours time format).
Select the Date Format among MM-DD-YY (default), DD-MM-YY or YY-MM-DD.
Select North Up (the top of the page is fixed to North) or Course Up (the top of the page
is orientated to the direction the vessel is heading. This is the default).
Allows the beep produced when a key is pressed to be turned On (default) or Off.
Units of Measure can be selected for Distance, Speed, Depth, Altitude and Temperature:
Distance: selections are Nm (Nautical Miles), Sm (Statue Miles), Km (Kilom-
eters), Nm+Mt, Nm+FT. Note when "Nm+FT" is selected if the distance is less
than 1.0 Nm, it turns to Feet. When "Nm+Mt" is selected if the distance is less
than 1.0 Nm, it turns to Meters.
Speed: selections are Kts (knots), MPH (miles per hour), Kmh (kilometer per
hour).
Depth: selections are FT (feet), FM (fathoms) and Mt (meters).
Altitude: selections are FT (feet) and Mt (meters).
Temperature: selections are F (Fahrenheit) and C (Celsius).
is selected or International symbols when International is selected. When selected these
functions affect how the icons for Lights, Signals, Buoys and Beacons are displayed.
Changes the background colors of the chart page to enhance the visibility of the screen
depending on the surrounding light conditions. Normal is recommended when the GPS
Chart Plotter is not exposed to the direct sunlight. When this mode is set the charts are
displayed in order to use colors as similar as possible to ones used in the original paper
charts. Classic uses vivid chart colors presentation. NOAA allows setting NOAA paper
chart colors presentation. Night is recommended when the environment is dark in order
to reduce the glare of the display. The GPS Chart Plotter displays charts and screen in
darker colors. Sunlight (default) is designed to enhance the visibility of the screen when
the GPS Chart Plotter is exposed to sunlight. The charts are much brighter than in the
other modes and the depth areas are filled with the white color so different depth areas
are not easily distinguishable.
Select from a variety of Ship Icons that represent your vessels position on the Chart page.
The default is Icon 6.
Selects the speed among Low, Medium (default) and High for the cursor in the CHART
page and within the MENU.
When this function is On, and the ShuttlePoint knob is moved to a location where you want
to start measuring a distance and press [ENT]. Move the ShuttlePoint knob to move the
cursor to a second location where you want to finish measuring a distance and press
[ENT]. A line will appear between the Start and Finish points and a popup window will be
shown indicating the distance and bearing from the Start and Finish points. Press [ENT]
to delete both points (Off is the default).
GPS Chart Plotters