Rear Final Drive Removal - Honda SXS700M4 Service Manual

Connect the 4WD select switch connector [1).
Install the following:
- left drive shaft (page 18-13)
- front wheels (page 19-6)
- front bumper (page 2-17)
Fill the gear case with the recommended oil
(page 3-13).
Adjust the selector cable (page 18-65).
REAR FINAL DRIVE REMOVAL
Drain the rear final drive oil (page 3-13).
Remove the following:
- right rear drive shaft (page 18-8)
- right lower arm (page 19-23)
- rear brake caliper mounting bolts (page 20-20)
- breather hose [1]
- VS sensor 3P connector [2]
Remove the boot bands [1[ and release the propeller
~iii;;
shaft boot [2) off the pinion joint [3) of the gear case.
DRIVE SHAFT/FINAL GEAR
18-45