Honda SXS700M4 Service Manual page 455

Install the stabilizer
links with the
identification mark
facing up.
INSTALLATION
NOTE :
The upper and lower arm pivot fastener lightening is
performed after adjusting the suspension arm angle
(page 19-26),
STABILIZER ARM AND LINK
Install the stabilizer bushings [1[ and holders [2) onto
the stabilizer arm [3).
Install the stabilizer arm onto the frame with bolts [4J
and nuts (5]. Tighten the four bolts while holding the
nuts alternately.
TORQUE : 27 N'm (2.8 kgf-m , 20 IbHt)
The stabilizer links [1 ] have the identification mark:
Left link: L mark [2]
Righi link: R mark (3]
Install the stabilizer links with new link nuts [4) and
lighten them while holding the stud bolt end.
TORQUE: 46 N-m (4.7 kgf'm , 341bHt)
WHEEUSUSPENSION
131
19-25