Countershaft; Output Shaft - Honda SXS700M4 Service Manual

WASHER
SUB·TRANSMISSION/GEARSHIFT LINKAGE
Remove the lock washer on the shaft end with a screwdriver and disassemble the countershaft according to the
illustration
SHAFT GUIDE
GEAR SHIFTER
WASHER
REVERSE GEAR
SHAFT GUIDE
BEARING (20
x
24
x
17)
COUNTERSHAFT
BEARING (20
x
24
x
13)
INSPECTION
COUNTERS HAFT
BEARING (20
x
24
x
17)
Check the gear dogs and splines in the shaft guides (1]
for abnormal wear or damage .
Check the teeth and splines of the drive gear [2) and
reverse gear
13)
for abnormal wear or damage.
Check the gear shifter (4) for smooth operation.
Check the gear shifter groove, dogs and splines for
abnormal wear or damage.
Check the countershaft (5) and needle bearings (6] for
abnormal wear or damage.
OUTPUT SHAFT
Check the teeth and splines of output driven gear [1) for
abnormal wear
Of
damage.
Check the ou tput shaft [2) for abnormal wear or
damage .
12J
I'J
12J
13-11