Honda SXS700M4 Service Manual page 179

INSPECTION
Remove the O-ring
[11
from the relief valve {2].
Check the operation of the valve by pushing on the
piston [3].
LUBRICATION SYSTEM
121
L
Temporarily assemble each inner rotor, outer rotor and
~==-------=::;:::;;;;;;;;;;;;:~
drive pin on the pump shaft, and install them into each
pump body individually.
Measure the rotor lip clearance.
SERVICE LIMIT: 0.20 mm (0.008 in)
Measure the body clearance.
SERVICE LIMIT: 0.25
mm (0.010 in)
Remove the oil pump shaft and drive pin.
Measure the side clearance.
SERVICE LIMIT: 0.11
mm
(0.004
in)
8-7