Honda SXS700M4 Service Manual page 180

LUBRICATION SYSTEM
ASSEMBLY
Coat all inner parts with clean engine oil.
Inslall the outer rotor [1J and inner rotor
12]
into the
pump body A (3].
Insert the drive pin [4] into the pump shaft (5].
Install the pump shaft through the inner rotor and pump
body
A.
aligning the drive pin with Ihe rotor grooves.
Apply locking agent to Ihe sprocket boll [1J threads.
Install the driven sprocket [2] onto the pump shaft,
aligning the flats . Install the sprocket bolt and tighten
it.
TORQUE: 12 N'm (1 .2 kgf-m , 9lbHt)
131
[51
"D
I CS
Coat a new O-ring {1] with engine oil and install it into
:===================
8-8
the relief valve [2] groove.
Inslall the relief valve [1] into the pump body B [2J .
Inslall the oil pump body B onto Ihe pump body A [3] .
[21
[11