Honda SXS700M4 Service Manual page 324

DRIVETRAIN SYSTEM
16-36
INSPECTION
Check feed pipes fo r abnormal wear or damage.
NOTE:
The operating (engine) oil of each shift clutch is
supplied through the following :
- feed pipe A [1] for the 151 shi ft clutch
- feed pipe B [2] for the 2nd shift clutch
- feed pipe C [3] for the 3rd shift clutch
{31
121
Check the crankshaft seal collar [1] behind the bearing
;;;;:::;;;;;::==:;;;;:::=::::;;;;;;;;;;;;;;;;;;;;;;;;;;;
for abnormal wear or damage .
NOTE :
• The crankshaft seal collar is for the engine oil
supplied to the torque converter and crankpin
Replacement (page 16-36).
BEARING REPLACEMENT
Remove the crankshaft bearing (1] using the special
.--.::-----=::;;;;;,-;;,------------,
lools.
TOOLS :
Bearing remover, 17 mm [2] 07936-3710300
Remover handle 07936·3710100
Remover weight [3J 07741-0010201 or
07936-371020A or
07936-3710200
(U .S.A. only)
Drive the output shaft bearing [4} out of the crankcase
cover.