Cam Chain Tensioner Lifter - Honda SXS700M4 Service Manual

CAM CHAIN TENSIONER LIFTER
REMOVAL/INSTALLATION
Remove the front seal cushion (page 2-4).
Remove the cam chain tensioner lifter plug [1] and
sealing washer [2].
Turn the cam chain tensioner lifter shaft fully in
(clockwise) and secure
it
using the special tool.
TOOL :
Tensio ner holder B [1]
070MG-0010100
or
07AMG·001A100
o r
(U.S.A . only)
07 AMG-MFJA 100
(U.S.A. o nly)
Remove the cam chain tensioner lifter mounting bolts
121
Remove the cam chain lensioner lifter [3J and gasket
CYLINDER HEADNALVE/CAMSHAFT
[4].
,'Or . ••
Install a new gasket [1] on the cam chain lensioner lifter
~;~;;;~;~;;;:;:;:;:::::.~:;~::::::~
[2) and install them to the cylinder.
Instan and tighten the cam chain lensioner lifter
:;;:~;;;;;;!!:;::::::;;=::=::!==~
mounting bolts
[1J.
Remove the lensioner holder.
Install and tighten the cam chain lensioner lifter plug [2)
with a new sealing washer [3).
Inslalithe front seal cushion (page 2-4),
10-21