Honda SXS700M4 Service Manual page 321

Coat new O-rings [1] with engine oil and install them
into the grooves in each shift solenoid valve.
Do not interchange Install shift solenoid valves A [2) and B [3] into the
valves
A
and B.
solenoid valve body.
Install the valve body cover slay [1J and two bolls (21.
and tighten the bolts.
INSTALLATION
Clean the mating surtaces of the valve body assembly
and fron t crankcase cover, being careful not to damage
them.
Coat new O-rings 11] with engine oil and install them
into the grooves in the oil joint collars [21.
Install the four joint collars and a new gasket (3] .
Install the shift valve body assembly [1) with the six
bolts [2] and tighten bolts securely.
DRIVETRAIN SYSTEM
13]
121
16-33