Honda SXS700M4 Service Manual page 329

- needle bearing {1]
- washers {2]
- thrust needle bearing [3J
- Inner collar [4]
- needle bearing [5]
INSPECTION
NOTE :
• Replace the torque converter as an assembly (from
converter to inner collar).
Check the primary drive gear [1] teeth for abnormal
wear or damage.
Hold the torque converter and turn the drive gear to
check the one-way clutch in the torque converter.
The gear should turn counterclockwise smoothly and
should not turn clockwise.
Check the needle bearings for abnormal wear or
damage.
Check the sprag clutch [1] in the stator shaft [2] for
abnormal wear, damage or irregular movement.
Check the sprag clutch contacting surface of the inner
collar [3] for abnormal wear or damage.
Check the seal ring [1J on the stator shaft for
deterioration, wear or damage.
DRIVETRAIN SYSTEM
111
12)
11 )
16-41