Honda SXS700M4 Service Manual page 181

Insert the drive pin 11J into the pump shaft.
Install the inner rotor [2J onto the pump shaft, aligning
its grooves with Ihe drive pin.
Install the outer rotor
[3J
into oil pump body C [4].
Install the pump body C onto the pump body B (5].
Install the dowel pins
PI
through the pump bodies C, B
and A.
Insert the drive pin [2J into the pump shaft.
Install Ihe inner rotor [3] onto Ihe pump shaft, aligning
its grooves
with
the drive pin.
Install the Quter rotor (4] into the oil pump body D (5).
Install the pump body D onto the pump body C.
LUBRICATION SYSTEM
['[
[3] ~
--"711 --"711 ]']
[3]
Iii iI
Make sure thai there is no clearance at the mating
~=================~
surfaces of the pump bodies.
Instalilhe two assembly bolts (1].
8-9