Service Manual – Floortec R 870
Removal and Installation
Steering Wheel Disassembly/Assembly
Disassembly
1
Drive the machine on a level floor.
2
Turn the ignition key to "0" and engage the parking brake
3
Disengage and remove the cover (A)
4
Unscrew the nut (B) and remove the washer (C)
5
With a suitable puller, remove the steering wheel (D) using the surface (E) of the steering shaft and the
threaded holes (F) of the steering wheel, or its lower edge (G); in case the lower edge (G) is used, insert
metal plates between the edge and the puller, in order to distribute the load and prevent damage to the
lower edge (G) itself
Assembly
6
Assemble the components in the reverse order of disassembly
B
G
E
B B
D
F
Steering System
A
B
D
156
C
P200166