Nilfisk-ALTO FLOORTEC R 870 Service Manual page 110

Service Manual – Floortec R 870
Engine Oil Change
Caution! The discharged engine oil has
to be disposed of properly
according to the Law in force.
Note: It is advisable to change the oil
when the engine is still hot, to
make the oil downflow easier.
1 Drive the machine on a level ground and engage
the parking brake
2 Turn the ignition key to "0"
3 Open the engine compartment hood with the
handle and fasten it with the support rod
4 Lift and disassemble the right side bulkhead
5 Remove the oil filler plug/dipstick (A). Place the
hose (E) in a position that eases the oil drain,
then remove the plug (F)
6 Drain all the engine oil through the hose (E) and
collect it in a proper container
7 Install the oil drain plug (F) and place the hose
(E) back to the original position
8 Pour new oil in the filler neck (B) up to the
upper limit mark (D) (lower edge of the oil filling
hose) on the dipstick
Note: For the engine oil type and
quantity, see Specifications
paragraph.
9 Install the oil filler plug/dipstick (A) and tighten
it
10 Perform steps 4 and 3 in the reverse order
F
A
B
E
A
Engine System - LPG
D
P200133
110