Nilfisk-ALTO FLOORTEC R 870 Service Manual page 227

Service Manual – Floortec R 870
Front Driving Wheel Armature Disassembly/Assembly (Continues)
6 Remove the fastening screws (H) of the carbon brush cap (J) Retrieve the washers (I)
7 Remove the carbon brush cap assembly (J); take the greatest care in order not to remove/displace the
stator from its position
8 Remove the compensating ring (K)
9 Place the assembly (L) with the outer side (M) of the right bracket laying horizontally on the workbench,
in order to prevent the oil from spilling out when removing the armature (N)
10 Remove the armature (N) taking care not to damage the reduction unit oil grommet (P)
M
I
H
J
L
N
K
L
P
Wheel System, Traction
J
N
P200209
227