Nilfisk-ALTO FLOORTEC R 870 Service Manual page 171

Service Manual – Floortec R 870 Main Broom System
171
Skirt Disassembly/Assembly (Continues)
Front Skirt Removal and Installation
Note: It is advisable to place the machine on a hoisting system.
10 Remove the main broom
11 Remove the side brooms
12 On the left front side of the front skirt (D), disengage the clip (E) then disconnect the terminal (F) of the
skirt lifting tie rod form the bracket (G)
13 Remove the six nuts (H) then remove the strap (I) from the main broom compartment
14 Remove the front skirt assembly (J) from the front
15 At the workbench, unscrew the six nuts (K) and remove the section bar (L) and the strap (M).
16 Retrieve the front skirt (N)
17 Install the front skirt (N) in the reverse order of disassembly
18 Check the front skirt height
F
E
M
I
H
N
K
L
D
G J
P200244