Nilfisk-ALTO FLOORTEC R 870 Service Manual page 73

Service Manual – Floortec R 870
Battery Removal/Installation and Battery Type Setting (WET or GEL/AGM)
(Floortec R 870 Battery) (Continues)
Battery Removal
1 Engage the parking brake
2 Remove the ignition key
3 Open the battery compartment hood (A) with the handle (B) and fasten it with the support rod (C)
4 Disconnect the battery connector (D)
5 Disconnect the battery wiring harnesses (E)
6 Remove any square guide or bracket fastening the batteries (E)
7 Check that WET battery caps (J) are closed, to prevent the highly corrosive acid from leaking out of the
batteries
8 With the help of an assistant and an appropriate hoisting system, remove the batteries (E).
D
J
C
B
A
Electrical System
E
73
P200227