Nilfisk-ALTO FLOORTEC R 870 Service Manual page 129

Service Manual – Floortec R 870
Engine-Dynamotor Unit Disassembly/Assembly
Disassembly
1 Empty the LPG system (see the procedure in "LPG System Emptying")
2 Drive the machine on a level floor.
3 Turn the ignition key to "0" and engage the parking brake
4 Open the engine compartment hood with the handle and fasten it with the support rod
5 Disconnect the batteries
6 Remove the machine right body side (A), by lifting it to disengage it from the fasteners.
7 Disconnect the LPG hose (B) from the carburettor (C), as shown in "LPG System Hose and Fitting
Disassembly/Assembly LPG"
Close with sealing plugs the disconnected fittings to prevent foreign materials from entering into the
system
Engine System - LPG
A
C
B
129
P200215