Nilfisk-ALTO FLOORTEC R 870 Service Manual page 163

Service Manual – Floortec R 870
Main Broom Height Check and Adjustment (Continues)
6 Turn the fasteners and remove the left door
7 Loosen the locknuts (C)
8 Turn the screws (D) to adjust the height of the broom left side, and adjust it to the right side, as follows:
• Lift the lever (E) to lower the left side of the broom;
• Lower the lever (E) to lift the left side of the broom
When the adjustment is completed, tighten the locknuts (C).
9 Perform step 1 again to check that the main broom is at the correct distance from the ground
10 If necessary, adjust the transmission cable adjuster.
D
C
E
C
D
Main Broom System
163
P200170