Nilfisk-ALTO FLOORTEC R 870 Service Manual page 144

Service Manual – Floortec R 870
Hopper and Lifting Arm Disassembly/Assembly (Continues)
8 Apply a proper safety lifting rope (H) on the upper part of the hopper arms, as shown in the figure.
(Hopper weight with lifting arms: 16 kg)
9 Remove the side screws (I) and remove the rotating pins (J)
10 With a proper hoisting system (K), remove the hopper with lifting arms (L), by moving it backwards and
lifting it
Assembly
Assemble the components in the reverse order of disassembly
L
H
K
L
Hopper System
I
J
P200159
144