Nilfisk-ALTO FLOORTEC R 870 Service Manual page 125

Service Manual – Floortec R 870 Engine System - LPG
125
Pressure Regulator Removal/Installation (Continues)
9 Disconnect the electrical connections (D) and (F)
10 Remove the fastening screws (G) of the pressure regulator assembly with valves (H)
11 Remove the pressure regulator assembly with valves (H)
12 At the workbench, remove the fitting (I) from the fitting (J).
13 Unscrew the fitting (J) from the pressure regulator (K).
14 If necessary, unscrew the fittings (L) and (M) from the pressure regulator (K).
15 Retrieve the pressure regulator (K)
Assembly
16 Assemble the components in the reverse order of disassembly
17 Perform the LPG System Leakage Check (see the procedure in LPG System Leakage Check paragraph)
18 If a new pressure regulator has been installed, adjust the CO2 (see the procedure in "CO Adjustment")
2
F
D
J
I
J
H
K
L
M
G
P200231