Nilfisk-ALTO FLOORTEC R 870 Service Manual page 226

Service Manual – Floortec R 870
Front Driving Wheel Armature Disassembly/Assembly
Disassembly
1 Remove the driving wheel and steering assembly (see the procedure in the previous paragraph)
2 Workbench, remove the screws (A) on the left side of the front wheel assembly.
3 Remove the spacer (B)
4 Remove the left bracket (C); if necessary use a puller (D)
5 With a marker, draw an alignment sign (E) between the rubber ring (F) and the carbon brush cap (G),
for a proper reassembly (to avoid that the driving wheel turns in the wrong direction)
A
B
C
Wheel System, Traction
D
E
F
G
P200208
226