Nilfisk-ALTO FLOORTEC R 870 Service Manual page 148

Service Manual – Floortec R 870
Hydraulic Hose Disassembly/Assembly
Disassembly
1 Drive the machine on a level floor.
2 Ensure that the hopper is closed
3 Turn the ignition key to "0" and engage the parking brake
4 Open the battery/engine compartment hood with the handle and fasten it with the support rod
5 Remove the machine right side bulkhead, by lifting it to disengage it from the fasteners.
6 Remove the hollow screws (B) and disconnect the hydraulic hoses (C) from the hydraulic unit (D)
Retrieve the gaskets (A)
B B
B B E E
C C
E C C
E
E
A A
A
C
Hopper System
C
B
P200160
148