Nilfisk-ALTO FLOORTEC R 870 Service Manual page 117

Service Manual – Floortec R 870
Solenoid Valve Filter Cleaning (Continues)
14 Overturn the solenoid valve (N) and fasten its body on a vice (P) with soft jaws
15 Unscrew the solenoid valve fitting (M).
16 Remove the filter holder (Q).
Inside the filter holder there is a cylinder with magnet (R) which will be cleaned and placed in the lower
side of the filter holder itself (as shown in the figure).
The filter holder gasket (S) has to be replaced with the corresponding spare part, before reassembly.
N
M
P
Q
Engine System - LPG
117
M
Q
R
S
P200229