Nilfisk-ALTO FLOORTEC R 870 Service Manual page 214

Service Manual – Floortec R 870
Brake Caliper, Pad, Brake Disc Disassembly/Assembly (Continues)
Assembly
11 Assemble the components in the reverse order of disassembly, and note the following:
• Adjust the position of the nuts (F) until the bracket (G) comes into contact with the brake disc (I) and
with the inner pad (L); then, unscrew the nuts (F) for 3/4 of a turn, thus giving a 1 mm clearance be-
tween the brake disc (I) and the pads (L) and (M) Also check the parallelism of the bracket (G) with
the fixed part, by equating the two portions (N).
• Screw down and tighten the nuts (E)
12 Adjust the brake according to the following procedure
F
N
I
G
M
F
E
F
E
L
Wheel System, Traction
I
N N
F
E
G
214
E
P200248