Nilfisk-ALTO FLOORTEC R 870 Service Manual page 172

Service Manual – Floortec R 870 Main Broom System
172
Skirt Disassembly/Assembly (Continues)
Rear Skirt Removal and Installation
19 Remove the main broom
20 Lift the hopper to the end-of-stroke
Warning! Place a safety rod under the lifted hopper.
21 In the hopper compartment, remove the nuts (P) and then remove the strap (Q) and the skirt (R).
22 In the main broom compartment, remove the strap (S) and remove the skirt (T).
23 Install the rear skirts (T) and (R) in the reverse order of disassembly
24 Check the rear skirt height
Reassembly
25 Assemble the components in the reverse order of disassembly
Q
T
P
S
R
P200174