Nilfisk-ALTO FLOORTEC R 870 Service Manual page 60

Service Manual – Floortec R 870
Dust guard System Water Pump Disassembly/Assembly (Continues)
6 On the right front upper side of the machine bed, disconnect the hose (C) of the water pump (D);
disconnect the filter assembly input hose (E).
7 Disconnect the connector (F) of the water pump (D)
8 Remove the holder assembly with pump and filter (G).
9 If necessary, at the workbench, unscrew the four screws (H), disconnect the hose (I), then remove the
water pump (D) from the holder
Assembly
10 Assemble the components in the reverse order of disassembly
I
E
G
H
F
C
D
Dust Guard System
60
P200115