Service Manual – Floortec R 870
Side Broom Lifting Cable Disassembly/Assembly (Continues)
5
On the other cable terminal (C), remove the screw with nut (G) and release the relevant grommet (F) of
the cable (C) to be removed
6
Unscrew the locknut (H) and remove the cable (C) from the cut (I)
7
Retrieve the cable (C)
Assembly
8
Assemble the components in the reverse order of disassembly, and note the following:
• Adjust the position of nuts/locknuts (E) and (H) until the proper side broom height is reached, by
keeping the adjusters (J) in an intermediate position
I
H
C
C
C
F
G
Side Broom System
J
J
E
P200192
197