Nilfisk-ALTO FLOORTEC R 870 Service Manual page 164

Service Manual – Floortec R 870
Main Broom Disassembly/Assembly
Note: Brooms with harder or softer bristles are available. This procedure is applicable to all
types of brooms.
Warning! It is advisable to wear protective gloves when replacing the main broom because
there can be sharp debris between the bristles.
Disassembly
1 Drive the machine on a level ground and engage the parking brake
2 Turn the ignition key to "0" and remove it
3 Turn the fasteners and remove the left door
4 Unscrew and remove the knob (A)
5 Turn the levers (B) upwards
6 Remove the broom compartment latch (C) by grabbing it from its fold (D)
7 Remove the main broom (E)
B
A
D
B
C
E
Main Broom System
164
P200238