Nilfisk-ALTO FLOORTEC R 870 Service Manual page 225

Service Manual – Floortec R 870
Driving Wheel and Steering Unit Disassembly/Assembly (Continues)
14 At the base of the steering column (R) remove the screws (S) and remove the cover (T)
15 Remove the four fastening screws (U) of the driving wheel assembly (V)
16 Remove from the machine the driving wheel assembly (V) with the steering assembly (W), by removing
the hub (X) from the steering shaft; retrieve the key (Y)
17 If necessary, remove the screws (Z) and then separate the driving wheel assembly (V) from the steering
wheel assembly (W)
Assembly
18 Assemble the components in the reverse order of disassembly
19 Adjust the brake as described in the procedure for brake cable disassembly/assembly
U
X
U
Y
U
U
W
Z
V
Wheel System, Traction
R
S
T
S
U
P200207
225