Nilfisk-ALTO FLOORTEC R 870 Service Manual page 167

Service Manual – Floortec R 870
Skirt Height Check and Adjustment (Continues)
Front and Rear Skirt Check
7 Remove the main broom
8 Check the front skirt (F) and rear skirts (G) and (H) for integrity
Replace the skirts when they have cuts (C) larger than 20 mm or cracks/tears (D) larger than 10 mm
(see the procedure in "Skirt Disassembly/Assembly")
9 Check that the front skirt (F) and rear skirt (H) slightly rub the floor without being detached from it (see
the diagram (I))
Reassembly
10 Assemble the components in the reverse order of disassembly
> 10 mm
(> 0.4 in)
C
> 20 mm
(> 0.8 in)
D
F
G H
Main Broom System
167
I
P200172