Nilfisk-ALTO FLOORTEC R 870 Service Manual page 223

Service Manual – Floortec R 870
Driving Wheel and Steering Unit Disassembly/Assembly
Disassembly
1 If possible, place the machine on a hoisting system.
2 Turn the ignition key to "0" Ensure that the machine cannot move by placing opposite wedges (A) on the
rear wheels
3 Open the battery/engine compartment hood
Disconnect the battery connector (Floortec R 870 Battery) - Disconnect the batteries (Floortec R 870
Petrol/LPG)
4 With a proper hoisting system applied to the machine chassis, to the front wheel area (B), lift the
machine a few centimetres, in order to easily remove the driving wheel assembly.
5 Remove the fastening screws (C) of the fairing (D) from the steering column
6 Slightly lift the steering column fairing (D) by disengaging it from the lower fastener (E)
7 Disconnect the dust guard system quick coupling (F)
8 Retrieve the fairing (D)
B
C
C
A
C
C
D
Wheel System, Traction
E
223
D
F
P200205