Nilfisk-ALTO FLOORTEC R 870 Service Manual page 149

Service Manual – Floortec R 870
Hydraulic Hose Disassembly/Assembly (Continues)
Collect the hydraulic system oil in a proper container
Plug the disconnected fittings, to prevent debris from entering into the hydraulic system.
Warning! Hydraulic system oil is highly corrosive.
Warning! The hydraulic system oil should be disposed of properly according to the Law in
force.
7 Open the fastening clamps (F) and the hoses (C)
8 Unscrew the connecting fittings (G) of the hydraulic cylinder hoses (H).
Collect the hydraulic system oil in a proper container
9 Retrieve the hydraulic hoses (C)
Assembly
10 Assemble the components in the reverse order of disassembly, and note the following:
• After the installation of the hoses (either the same hoses or new ones), fill the tank with hydraulic
oil up to the Max level, then run some hopper handling (the hydraulic system is self-bleeding); then,
check the hydraulic system oil level
G
C
C C
C
H
C C
A A
C
C
Hopper System
F
P200163
149