Ricoh FT4480 Field Service Manual page 185

8. Remove the rear
9. Remove the rear
10. Remove the paper feed PCB [B] (1 screw).
11. Remove the feed stay [C] (3 screws).
12. Remove the cassette arm lever [D] (1 spring [E], 1 E-ring [F]).
13. Remove the cassette arm assembly [G] (front - 1 E-ring [H] and 1
bushing [I], rear - 1 bushing [J]).
Press the pad positioning plate [K] down and unhook the spring [L]
14.
using a small screw driver.
15. Slide off the feed roller [M] (1 snap ring [N]).
16. Remove the nylon hub [O] from the feed roller.
17. Remove the E-ring [P] of the feed roller shaft.
cover (2 screws).
right side cover [A] (2 screws).
7-3
15 MARCH 1987