Ricoh FT4480 Field Service Manual page 61

15 MARCH 1987
- 2ND SCANNER DRIVE MOTOR REPLACEMENT -
Perform Steps 1 through 6 of "Lens Drive Motor Replacement."
1. Tape the 2nd scanner drive pulley [A] and the scanner drive
shown to avoid the scanner wire coming off.
2.
Remove the E-ring [B] from the 2nd scanner drive shaft and move the
pulley slightly in the direction of the arrow.
3. Disconnect the 2nd scanner drive motor connector [C] (6p; white)
and the nylon clamp [D] (1 screw).
4. Remove the mylar [E].
5. Replace the second scanner drive motor [F] from the front
(2 screws).
3-10
wire as